Aqua Lung Osprey Drysuit (Breathable Water Rescue Drysuit)

The Osprey is a long duration breathable water rescue drysuit designed for swiftwater, flood, and ice rescue missions. The unique design allows for a comfortable stand-by mode while still offering critical protection in unpredictable environments.

Features

• True self entry featuring Captive Zip Design (patent pending)
• Adjustable full circumference neoprene neckseal (patent pending)
• Saltwater resistant waterproof breathable material
• Fully donned or stand-by mode
• Anti-flush “wader belt” located under jacket
• Relief/comfort zipper
• Superior fit and comfort assisted by pre-shaped legs and torso
• Attached over jacket with dry zip protection
• Reinforced 420 denier nylon padded elbows,knees/shins, and seat
• Neoprene wrist seals with gauntlet overlays and hook and loop cinches
• Lower leg boot gauntlets with hook & loop cinches
• Attached soft dry socks
• Zippered chest pocket
• “Loop” shoulder panels for adhering patches
• High visible reflective patches, piping, and logos
• Picture shown with Evo boots (not included)

Material:

• Breathable/waterproof 3-layer material comprising:
• Durable 200 denier nylon, durable & water repellent
• Core - Breathable, non-porous, salt water resistant, polyurethane
• Inner layer - protective 18 denier nylon
• Neoprene wrist seals
• Adjustable circumference neoprene neckseal (patent pending)
• 420 denier nylon reinforced elbows, knees/shins, and seat

Color:
Red top/black bottom

Sizes:
S, M, MK, L, LK, XL, XLK, 2XL, 3XL, 4XL

Accessories:
Zipper lube and instruction manual. 

Size Chart / Click Here

RAPTOR SURFACE DRYSUIT
Breathable Water Rescue Drysuit

The RAPTOR is a long duration breathable drysuit designed for flood, swiftwater and other water rescue missions. Based on the field-proven OSPREY drysuit the RAPTOR’s improved design incorporates additional features. Overall the RAPTOR provides for a comfortable stand-by mode while offering protection in unpredictable environments.

FEATURES

• True self-entry featuring Captive Zip Design (patent pending)
• Quick-adjust neoprene neckseal (US Patent 9,714,074)
• Superior fit and comfort assisted by pre-shaped legs and torso
• Comfortable standby mode design with highly flexible T-zip
• Saltwater resistant waterproof breathable material
• Attached over jacket with dry zip protection
• Anti-flush “wader belt” located under jacket
• Low profile auto exhaust valve mounted behind neck
• Reinforced padded elbows, knees/shins, and seat
• Neoprene wrist seals with improved gauntlet overlays and hook and loop cinches
• Lower leg boot gauntlets with hook & loop cinches
• Relief/comfort zipper
• Attached soft dry socks
• Zippered chest pocket
• Two (2) thigh pockets with securing flaps
• “Loop” shoulder panels for adhering patches
• High visibility reflective patches
• SOME SIZES AVAILABLE TO SHIP SAME DAY FROM BILLINGS, MT

MATERIAL

• Breathable/waterproof 3-layer material comprising:
• Outer: durable 200 denier nylon, durable & water repellent
• Core: breathable, salt water resistant, polyurethane
• Inner: protective 18 denier nylon
• Neoprene wrist seals
• Neoprene neckseal
• 1680 denier nylon reinforced elbows, knees/shins, and seat

COLOR
High visibility yellow top / black bottom

SIZES
XS, S, SK, M, MK, L, LK, XL, XLK, 2XL, 3XL, 4XL

SIZE CHART: CLICK HERE

ACCESSORIES
Zipper Lube and Instruction Manual

AQUA LUNG RAPID DIVER PRO

The RAPID DIVER PRO is a lightweight, all-inclusive Scuba system that integrates a tank, regulator and buoyancy control module to a uniform-fit, load-bearing harness. It was created in response to public safety requests for a universal fit, compact, versatile and easily deployed Scuba system.

•Rapid front mount design
•Simple, quick, and convenient to use
•Self-adjustable with easy donning and doffing
•Aqua Lung Titan LX regulators
•2 tank configurations: horizontal front or vertical back mount
•Dual bag construction with up to 50 lbs of lift
•1050 D ballistic nylon fabric
•MOLLE cross webbing
•Integrated LP inflater with remote exhaust
•3 rapid pull exhaust dump valves
•Up to 50 lbs of lift
•27 CF steel primary tank
•2640 PSI low pressure
•Pre-sewn badge attachment
•Single carry case - ready to dive
•Soft carry case stores easily in trunk
•Supplied with black Aqua Lung Micro mask
•Supplied with paramedic shears in nylon sheath

Aqua Lung Enviro Dry Suit

ENVIRO DRYSUIT
The Enviro Drysuit is designed for the professional drysuit diver that needs to adequately and thoroughly clean their drysuit at an economical price. This suit has been used for divers diving in biologically contaminated water and vehicle recoveries. The Enviro has no exposed neoprene and all exterior surfaces have a smooth surface for easy cleaning.

FEATURES

• Chemical resistant polyurethane outer surface
• Sewn and exterior tape welded seams
• Tear and puncture resistant nylon inner
• Comfort boots with 7mm neoprene lining
• Permanently attached round SLT dry glove rings with replaceable Polytex Pro wrist seals.
• Permanently attached SLT neck ring with Polytex hood and neckseal combo.
• Apeks standard exhaust valve & standard inlet inflation valve
• Includes hood liner, internal suspenders, inflator hose, Hazmat patch kit and a drysuit bag

EVO4 SCUBA Dive Boots

• Mid-height
• Lace pocket
• Ankle support
• Renowned Vibram® Megagrip sole
• Thumb loop / donning aide
• Fin Keeper / doffing aide
• Low profile design allowing more fin choices
• Simple, quick, and easy lace up system
• Velcro plush heal works similar to Fusion boot for attaching to Fusion drysuit
• Ships in shoe box

• Material: Neoprene, Loop, Rubber, Mesh, Polyurethane, webbing, Vibram Megagrip Sole, Nylon, Felt
• Weight 3.2 Lbs (1.45kg)
• Sizes 4/5, 6, 7, 8, 9, 10, 11, 12, 13, 14/15 (PLEASE SELECT SIZE IN ORDER NOTES)

Aqua Lung BC 1: Military & Professional BC

*Note the AL BC 1 along with all products on this site are not free. Aqua Lung does not allow AL Public Safety Dealers to put pricing on certain PS items. Our developers are working on a fix to alleviate any confusion as to $0. Thank you.

The Aqua Lung BC1 is a rugged, weight-integrated, back inflation BC designed with the advanced Military / Public Safety diver in mind. It crosses over nicely to many technical, recreational and specialty applications. Despite its heavy duty construction, it provides amazing comfort, fit and stability.

Modular Harness System
• Removable Back Pad
• Non-Swivel shoulder buckles
• Changeable waist belt 

Hook & Loop or Sure LockTM GripLock™ Tank Band and Buckle
• Secure
• Easy to adjust using presets
• Macro and micro adjustments
• Finger saver safety feature
• Highly effective miniature traction pad

Air Cell is constructed from durable 840 denier nylon
• Donut shape so that air can migrate left to right
• 4 dump valves
• Removable & replaceable
• 3 Overpressure relief valves
• Bladder Retraction System
• Adjustable chest strap
• Left & right attachment points

Total weight capacity
• All sizes are capable of holding
• 42 lbs of weight
• 32 lbs ditchable
• 10 lbs non-ditcable

Lift Capacities
• All sizes have a lift capacity of 52 lbs
• Twin Cylinder Capability

Polytex Drysuit Neck Seal - Sized

Trimmable Drysuit Polytex Neck Seal. Don't get to the dive site and discover you have a torn neck seal. A torn or leaking neck seal can make for a miserable scuba diving experience or even worse NO Dive! Replace your old or worn out seal today with this high quality latex replacement.

Apeks Bailout Switch Block

The Bailout Switch Block allows the diver to switch from
a primary gas supply to an alternate bailout gas supply
(Emergency Gas Supply – EGS). The Switch Block is
used with any diving helmet or full face mask with
a medium or low pressure gas supply.

*Contact us for purchase. Item is not free.

Key Features

• Robust, durable and reliable
• User-friendly configuration and operation
• All ports marked for easy identification
• Use with surface-supply umbilical or Scuba cylinder
• CE Approved to standard EN15333-1:2008

Ports

• 4 x standard 3/8in MP outlet ports
• 1 x Bailout inlet port with 3/8in Hose Adaptor (male)
• 1 x 1/2in NPT dual-use outlet/inlet port: see versions below

Mounting Arrangement

• Universal mounting plate suitable for all diver harnesses
• Block retained in place by spring-loaded button catch
• Block easily removable from the harness mounting
• Mounting plate remains fixed to harness

Switch Block Versions

• AP0281/G: For use with the Aqua Lung G3000SS Diving Helmet
• AP0281: For use with all other full face masks and diving helmets. Includes non-return (one-way) inlet valve & umbilical adapters

Flow Restrictor
An optional Flow Restrictor is available for use with a suit inflator hose

*Contact us for purchase.

Aqua Lung (Whites) Enviro Hybrid Drysuit

The Whites (now Aqua Lung) Enviro Hybrid encompasses both the technologies of the Hazmat and the Enviro into one suit. The Hazmat’s outstanding durability covers the complete bottom of the suit from the waist seam down and the light weight mobility of the Enviro material completes the top of the suit. This combination allows for great upper body movement for swimming while giving superior protection in lower extremities where the suit take most of the abuse.

Features

• HazMat Multi-Laminate bottom for superior puncture and abrasion resistance
• Enviro Bi-Laminate Top for superior mobility and flexibility
• Chemical resistant polyurethane outer surface
• Exterior tape welded seams
• Tear and puncture resistant nylon inner
• Comfort boots with 7mm liner
• Permanently attached dry glove rings with replaceable Polytex wrist seals
• Standard Exhaust valve & standard inlet inflation valve
• Attached Polytex hood and neckseal. Optional SLT system
• Includes hood liner, internal suspenders, inflator hose, patches, adhesive strips and a drysuit bag

Sizes

XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL

Part Numbers

Part No. 612214
Enviro - MTO (Made To Order)
Color: Red

Part No. 612216
Enviro - MTM - (Made To Measure)
Color: Red

Part No. 612215
Enviro - MTO (Made To Order)
Color: Black

Polytex Drysuit Neck Seal w/ Dry Adhesive

Trimmable Drysuit Polytex Neck Seal with Dry Adhesive. Don't get to the dive site and discover you have a torn neck seal. A torn or leaking neck seal can make for a miserable scuba diving experience or even worse NO Dive! Replace your old or worn out seal today with this high quality latex replacement.

What are Polytex Seals?
Whites Polytex seals are a combination of Vulcanized Natural Rubber Latex and Polyurethane. The Polyurethane stabilizes the Latex and helps inhibit the seal from tearing. Ever get a small tear in a seal and it runs the length when donning the Drysuit? Although not indestructible, Polytex reduces this tendency and allows for a repair to be made to the seal, not necessarily making a replacement mandatory. Additional anti-aging ingredients are added to combat the effects of ultra-violet light, ozone and copper. These additions make for a tougher, longer lasting seal when compared to standard latex seals.

Polytex neck and wrist drysuit seals come standard on the Whites (now Aqua Lung) Hazmat Drysuits.


*If immediate shipment is required, please call us to ensure your size is in stock.
*Please select Large or XL in Order Notes.

Polytex Drysuit Neck Seal w/ Dry Adhesive - One Size

Trimmable Drysuit Polytex Neck Seal with Dry Adhesive. Don't get to the dive site and discover you have a torn neck seal. A torn or leaking neck seal can make for a miserable scuba diving experience or even worse NO Dive! Replace your old or worn out seal today with this high quality latex replacement.

What are Polytex Seals?
Whites Polytex seals are a combination of Vulcanized Natural Rubber Latex and Polyurethane. The Polyurethane stabilizes the Latex and helps inhibit the seal from tearing. Ever get a small tear in a seal and it runs the length when donning the Drysuit? Although not indestructible, Polytex reduces this tendency and allows for a repair to be made to the seal, not necessarily making a replacement mandatory. Additional anti-aging ingredients are added to combat the effects of ultra-violet light, ozone and copper. These additions make for a tougher, longer lasting seal when compared to standard latex seals.

Polytex neck and wrist drysuit seals come standard on the Whites (now Aqua Lung) Hazmat Drysuits.

*If immediate shipment is required, please call us to ensure your size is in stock.

Polytex Drysuit Neck Seal - One Size

Trimmable Drysuit Polytex Neck Seal. Don't get to the dive site and discover you have a torn neck seal. A torn or leaking neck seal can make for a miserable scuba diving experience or even worse NO Dive! Replace your old or worn out seal today with this high quality latex replacement.

Polytex Drysuit Neck Seal - One Size is utilized on SLT system.