The SEASOFT PRO / M6™ 6 mm Drysuit Hood is designed to be worn with a full face mask. It has a skin-in seal facing the diver's face AND a skin seal facing out toward the mask with a layer of tough nylon fabric sandwiched in between the two.

The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

SEASOFT uses 4 different types of neoprene to make these hoods.

The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the best commercial diving hood available anywhere.

Why should you buy this SEASOFT PRO / M6™ 6 mm Drysuit Hood?

The SEASOFT PRO / M6™ 6 mm Drysuit Hood is our commercial drysuit hood designed to be worn with a full face mask. The PRO / M6™ has a layer of skin on the inside and on the outside with a layer of tough nylon in between these two layers. The skin allows the hood to seal to your face and the full face mask to seal to the hood.

Of course, the three back panels are of compressed neoprene to provide you with thermal protection as you descend. You don't want your hood getting thinner as the water is getting colder.

There are no seams down the middle of the chin, this prevents jaw fatique.

There are two layers of Titanium Flake Foil™ for added heat retention.
At the top of the hood there are two small holes with a built in baffle system inside the hood to purge excess air from inside your hood while preventing any cold water from entering.
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the perfect commercial hood for that specific dive.

Click Here for Full Face Masks

Dive Booties 3mm BARE Feet - Unisex

For tropical and warm water diving or snorkeling. Can also be used as a beach/boating shoe or any casual water sport application.

Features and Benefits

Sizes: USA 4, USA 5, USA 6, USA 7, USA 8, USA 9, USA 10, USA 11, USA 12, USA 13

SEASOFT Ti PRO 6 mm Drysuit Hood with Zipper

The SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper is the most comfortable and warmest drysuit hood available, Here's why:

• The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!
• Rugged #10 size zipper for those that desire this feature.
• There are no seams in the middle of the seam to cause jaw fatique.
• SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.
• There are two tiny holes in the top of the hood with a baffle system to allow air to purge.
• There is "skin in" on the neck to bind to your drysuit seal.
• High quality neoprene is used throughout on every hood.

Why should you buy this SEASOFT Ti PRO™ 6 mm Drysuit Hood with a Zipper?

The short answer is that this hood is more comfortable and warmer than any other hood made by any other company but here's why it is. And we added a #10 size zipper for the extra convenience for those who desire that feature.

FACT: The head is responsible for the greatest heat loss while diving, up to 35%.

FACT: Other hoods use neoprene that contains lots of air bubbles, the claim being they are comfortable. However, lots of bubbles create a hood that easily compresses while diving – good-bye thermal protection! The neoprene is getting thinner just when you need it the most!

FACT: Many divers get cold thinking it’s their wetsuit or drysuit making them cold when it’s the lack of a warm hood.

SOLUTION: SEASOFT uses compressed neoprene in the three back panels for unsurpassed warmth. SEASOFT Hoods do NOT get thinner at depth; they keep you warm and toasty throughout your dive.
FACT: Most companies cookie cut their hoods, the left side could be the right side, there is a seam right down the middle of the chin which caused jaw fatigue.

SOLUTION: All SEASOFT Hoods are designed and manufactured without seams in the middle of the chin. Other companies build hoods with this seam because it is less expensive to manufacture them this way.

FACT: Most companies use one type of neoprene and occasionally two to make their hoods, this keeps costs low.

SOLUTION: SEASOFT never uses less than 4 types of neoprene to make its hoods because each part of the hood is performing a different function. You deserve to be warm AND comfortable!
ALL SEASOFT Hoods have two layers of Titanium Flake Foil Technology™ for extra warmth.

So there are the facts, SEASOFT has invested in the engineering to bring you the Ti PRO™ 6 mm Drysuit Hood w/ zipper that is unsurpassed in performance, all you have to do is get one for yourself.

Description
BARE 5mm  Wetsuit Boot - SALE!

• 5mm neoprene boot with a durable non-slip sole
• Heavy-duty zipper with gusset for easy entry
• Double-glued and blind stitched

Sizes 4-13

4-3XS
5-2XS
6-XS
7-S
8-M
9-L
10-XL
11-2XL
12-3XL
13-4XL

BARE SealTeck Coldwater Drysuit Hood

Our highest performance hood that set the standard for comfort and sealing.

• All exterior seams are sealed with BARE’s SEAMTEK liquid seam tape and incorporate our SEALTEK ring seal system designed to work together to reduce or eliminate water penetration and improve diver comfort and warmth
• 7MM ELASTEK full-stretch neoprene for ultimate stretch and comfort
• 5MM ELASTEK/GLIDESKIN-IN trimmable face and neck seal glides nicely over your hair
• SEAMTEK exterior seam protection reduces water penetration at the seams keeping your head warm and dry
• Incorporates BARE’s SEALTEK ring seal system for maximum water sealant performance when used with a drysuit
• Vented to allow trapped air to escape
• Hood neck seal mates with wetsuit seal/collar
• Mask strap grip pad on the back of the hood secures your mask strap in place
• Double glued and blind stitched with SECURE-LOCK construction improves isolation and reduces flushing keeping you warmer and diving longer

7mm SEALTEK COLDWATER DIVE HOOD

BARE 7mm Sealteck Coldwater Hood is the finest high performance divers hood we’ve ever made. Recreational and professional scuba divers will appreciate its outstanding comfort and ease of donning and doffing.

BARE 6mm Ice Dive Boots

• 6mm neoprene boot with a heavy-duty sole
• Durable toe and heel cap
• Fin tab to prevent strap movement
• Heavy-duty zipper with gusset for easy entry
• Double-glued and blind stitched

Sizes 4-13

BARE 7mm Coldwater Dive Boots

• 7mm neoprene boot with durable non-slip sole
• Vulcanized rubber sole, toe cap and heel cap
• Heavy-duty zipper with gusset for easy entry
• Double-glued and blind stitched
  

*Limited Supply

BARE 7mm Sport S-Flex Full Wetsuit - Medium

MULTI-SPORT FULL-STRETCH. This suit is designed for those who enjoy all types of watersports and want the performance of a FULL-STRETCH suit - without stretching their budget. These suits set the standard in an entry level product, combining unmatched value with BARE’s legendary fit and performance. As with every suit we design, the Sport S-Flex began with BARE-FIT. Our design team develops anatomically correct patterning for a 3D shape to achieve optimum movement. Then our in-house R&D team tests our designs to ensure they perform to their expectations.

Choice of material is also crucial. Our new S-FLEX FULL-STRETCH NEOPRENE is soft and comfortable and easy to get on and off. All thickness provide unprecedented stretch and mobility. You will notice the feel and comfort immediately when trying the suit on.This suit is ideal for the price conscious multi-sport enthusiast who appreciates comfort and performance and can skip some of the extra features found in our higher-end wetsuits.

• Comfortable contoured 5MM GLIDESKIN collar with Velcro™ adjustment minimizes water entry through neck/zipper keeping you diving longer
• Extra long heavy-duty back zipper for easy in, easy out of the suit
• Seamless underarms for superior comfort
• Loop at base of zipper assists donning
• Edges finished with stretch nylon binding for a clean look improving overall appearance
• Anatomically correct pattern for three dimensional fit throughout
• Double glued with SECURE-LOCK construction improves isolation and reduces flushing keeping you warmer and more comfortable underwater
• S-FLEX is developed from a proprietary blend of neoprene that generates extreme levels of stretch for an easy in, easy out of the suit, improves comfort and mobility, and is wrapped in a buttery soft exterior finish
• ARMOR FLEX protection on the knees extending the life of your suit while maintaining FULL-STRETCH performance in the protected areas
• 2 Year Warranty

BARE 3mm Reactive Wetsuit - Mens

Introducing a major innovation in wetsuit comfort; Reactive, the first wetsuit in dive to use Celliant® Infrared fabric, a responsive textile, that continuously warms the diver using their own body heat.

WHAT IS CELLIANT® INFRARED
The suit is made with scientifically proven Celliant® Infrared Technology - 13 thermo-reactive minerals woven into the fabric lining that convert body heat into infrared energy and reflect it back onto the diver. Medical studies have shown that infrared energy improves the body’s circulation. Increased circulation improves oxygen levels in the body, enabling you to use less energy, improving overall warmth and increasing your dive time.

KEEPING DIVERS WARMER
Reactive is the first dive suit of its kind to utilize Celliant® Infrared Technology. Because we’ve also incorporated our No-Stitch Technology (NST), a construction technique that virtually eliminates seam stitching – it’s all heat taped and sealed – the diver stays warmer by reducing flushing within the suit. Usually, we use that system for drysuits – this is the first wetsuit we’ve used it on. We’ve also incorporated a proprietary neoprene offering our highest degree of stretch, so it’s unbelievably comfortable and responsive to dive in.

Features and Benefits

• Velcro adjustment on collar features a booklet-style cover, to protect your suit from snags and pilling
• Seamless underarms for superior comfort and mobility
• Extra-long (21”) S-Lock2 back zipper with offset tooth design and PU coated zip tape guards against water entry
• Skin-to-skin double internal sealing zipper flap
• Full length puller with silicon print for easy grip; grip tab at base of the zipper
• Extra-long (11”) heavy-duty ankle zippers for easy donning
• Armor Flex 2.0 highly flexible, durable, abrasion resistant 3-D kneepads
• Anatomically correct pattern for three dimension fit throughout

Sizes

SHARKSKIN  Titanium 2 Long Pants - Male

SHARKSKIN's new Titanium 2 product range offers outstanding thermal protection tested equivalent to 5mm neoprene and can be worn as your primary exposure protection in waters down to 68° F (20° C).

Sharkskin's legendary Chillproof material has been embedded with nanoparticles of titanium that capture and retain significantly more body heat. The inner layer features a "hollow yarn" fleece that holds and warms water next to the skin while in the water. The middle technical layer is a one-way membrane that regulates body temperature on the surface by keeping out wind and water but allowing water from the inner layer to wick rapidly away from the body. The new, updated outer layer is a nylon/lycra blend with exceptional four-way stretch, is abrasion resistant and has a water-repellant finish that sheds water.

Technical Specifications 

• Titanium Far Infrared nano-technology
• Breathable 10K+ membrane
• 100% windproof
• High quality abrasion resistant outer
• 4-way stretch for flexibility
• Neutrally buoyant
• Hollow fibre fleece
• Dries quickly when being worn
• Water repellent DWR treatment
• Anti-microbial for odour resistance
• UPF50+ for sun protection
• Designed to last

We source the world’s most technically advanced materials, create the highest quality design and utilize the best manufacturing techniques to create garments that are built to last.

Eco Friendly

At SHARKSKIN we are passionate about watersports activities and we care about minimising our impact on the environment. We use biodegradable and compostable packaging bags, minimise waste in our manufacturing and design long lasting products.

Sharkskin Performance Guarantee

SHARKSKIN garments come with a 2-year guarantee on workmanship. Excludes fading and degeneration as a result of excessive exposure to chlorine or sunlight. We guarantee SHARKSKIN will perform as advertised.

SHARKSKIN T2 CHILLPROOF LONG SLEEVE FULL ZIP TOP - MENS

The Titanium T2 Chillproof range provides maximum warmth. This revolution in thermal protection provides all the properties of traditional Chillproof plus the added benefit of titanium nano-technology that both captures and generates Far Infrared (FIR) energy to keep you warm and provide improved metabolic function for better recovery and health.

The full zip design allows you to zip up for 100% warmth and protection, or zip completely down when the sun comes out, your work rate goes up, or just for ease of getting on and off. It also has a high collar to keep your neck warm.

Titanium T2 Chillproof garments are windproof, lightweight, neutrally buoyant and provide the warmth of a 4-5mm traditional wetsuit. Replace your wetsuit in warm waters or layer-up with Sharkskin T2 for extra insulation in cold waters.

Technical Specifications 

• Titanium Far Infrared nano-technology
• Breathable 10K+ membrane
• 100% windproof
• High quality abrasion resistant outer
• 4-way stretch for flexibility
• Neutrally buoyant
• Hollow fibre fleece
• Dries quickly when being worn
• Water repellent DWR treatment
• Anti-microbial for odour resistance
• UPF50+ for sun protection
• Designed to last

We source the world’s most technically advanced materials, create the highest quality design and utilize the best manufacturing techniques to create garments that are built to last.

Eco Friendly

At SHARKSKIN we are passionate about watersports activities and we care about minimising our impact on the environment. We use biodegradable and compostable packaging bags, minimise waste in our manufacturing and design long lasting products.

Sharkskin Performance Guarantee

SHARKSKIN garments come with a 2-year guarantee on workmanship. Excludes fading and degeneration as a result of excessive exposure to chlorine or sunlight. We guarantee SHARKSKIN will perform as advertised.

Description Bare Women's 5/4mm Velocity Wetsuit

• THE RIGHT STRETCH IN THE RIGHT PLACE. A progressive-stretch suit that uses varying stretch panels in performance zones of the suit to enhance mobility and comfort. Progressive-stretch is a concept in full-stretch wetsuits only available in the Velocity series.
• It all starts with BARE-Fit, which is the foundation of every BARE suit. BARE-Fit uses ergonomic suit design involving complex shaped patterns with articulated legs and sleeves.
• From there, zones associated with performance within the suit are selected. Then, proven fabrics are chosen from various prototypes that have been tested for years. By placing the different fabrics in particular panels of the suit, the VELOCITY series delivers exceptional fit, feel and performance.

Sharkskin Chillproof Hood

More than 25% of body heat is lost through the head and extremities of the body. The hood design provides the best insulation and protection for cold dives and activities. It can even be worn under a conventional neoprene hood for extra warmth, and is flexible enough to slide off if required and still be comfortable.

• The comfortable 'hollow yarn' fleece layer is next to the skin and 'wicks' moisture and sweat away from the body to help keep you dry.
• The second middle 'technical' layer is 100% windproof yet breathes to regulate body temperature while stopping windchill.
• The third outer layer is a nylon/lycra blend for abrasion resistance and 4 way stretch.
• It is also UV resistant for sun protection and has a durable water repellent finish (DWR) to provide a protective shell that 'sheds' water.

SHARKSKIN™ HOOD SIZING

5MM SEALTEK WET SUIT HOOD

Neo Beanie - Unisex

Stay warm after the dive by wearing our neo beanie. Made from 2mm neoprene.

• 2mm stretch neoprene
• Covers head and ears
• Flatseam construction

Bare 7mm Sport Full Pink Wetsuit - Female

Constructed from standard neoprene, this suit is a reliable choice for beginners to experienced enthusiasts.

Features and Benefits

5mm BARE SPORT S-FLEX Wet Suit

MULTI-SPORT FULL-STRETCH. This suit is designed for those who enjoy all types of watersports and want the performance of a FULL-STRETCH suit - without stretching their budget. These suits set the standard in an entry level product, combining unmatched value with BARE’s legendary fit and performance. As with every suit we design, the Sport S-Flex began with BARE-FIT. Our design team develops anatomically correct patterning for a 3D shape to achieve optimum movement. Then our in-house R&D team tests our designs to ensure they perform to their expectations.

Choice of material is also crucial. Our new S-FLEX FULL-STRETCH NEOPRENE is soft and comfortable and easy to get on and off. All thickness provide unprecedented stretch and mobility. You will notice the feel and comfort immediately when trying the suit on.This suit is ideal for the price conscious multi-sport enthusiast who appreciates comfort and performance and can skip some of the extra features found in our higher-end wetsuits.

Bare 7mm Sport Full Wetsuit - Male

Constructed from standard neoprene, this suit is a reliable choice for beginners to experienced enthusiasts.

Features and Benefits

Bare 2mm Sport Shorty - Mens / Womens

Constructed from standard neoprene, this suit is a reliable choice for beginners to expereinced enthusiasts.

FIT AND VERASTILITY DONE RIGHT. SPORT family wetsuits are constructed from standard neoprene laminated with nylon 2-sides (N2S) fabric - know to be a durable and reliable choice for beginner to experienced enthusiasts, both above and below the waterline.

The SPORT series offers the most extensive selection of styles and INSULAYERING accessories displaying bold new graphics and more color options.

The SPORT series suits offer unmatched value while providing the same legendary BARE-FIT patterns that we use in all our other BARE wetsuit families.

• Heavy-duty back zipper
• Rolled edges with zigzag stitch
• Flatseam construction throughout for stretch and comfort
• 2 Year Warranty
• Material: 2mm N2S neoprene
• Innovation: ARMOR FLEX shoulder protection

XS Scuba Travel Wetsuit Hanger

• Unique folding design is ideal for travel
• Broad arms to support the shoulders of the wetsuit
• Designed for quick drainage and drying
• Folding arms for regulator, hood and accessories
• Swivel attachment hook
• Tough X-beam construction
• Full size: 15.75" x 8"x6.25"
• Folded size: 5.4" x 8" x 2.5"

• Repairs holes and tears
• Waterproofs & seals
• Protects against abrasion
• Rapid cure for fast in-field repairs
• Precision applicator tip

Apply cement on both edges of the repair area with the enclosed applicator brush.

Allow this first coat to dry for 5 minutes.

Next, apply a second coat to the repair area and allow it to dry for an additional 10 minutes.

Press and hold edges of repair together for long lasting repairs.

STORAGE Advance contents to tube neck and cap securely. To promote longer product life, always store tube in a cool, dry place with the tip end down. Original package blister card may be used for storage.

SEASOFT STEALTH™ 6 mm Booties

SEASOFT STEALTH™ 6 mm Booties, the best booties money can buy. To quote the comparison shown below "This boot (the SEASOFT STEALTHS) does everything right." We think you will agree!

The Seasoft Stealth is one of the more rugged boots in a group of rugged contenders. This boot does everything right. Climb into a pair of Stealths and you can confidently carry your gear up and down stairs or over rocks. The arch support provides stability and supports the foot and ankle. An elevated heel contributes to comfort and eases foot strain on those long hikes to the water’s edge under a heavy load.

The beefy outsole virtually eliminates flex and compression, and when fitted inside a fin it minimizes the up and down motion of the foot while kicking. According to Seasoft, this design was also intended to eliminate foot cramping while diving. So confident is the company that they actually offer a money-back guarantee—if you get cramps, they will either send you another pair to try, or you can return the boots for a refund.

The Stealth comes with lots of rubber armor protecting the neoprene on the top of the foot. The heel cap is also well armored, and it includes a fin strap keeper. The uppers reach six inches above the sole. The zipper has an efficient zipper lock. A gusset behind the zipper helps block water.

Why should you buy these SEASOFT STEALTH 6 mm Booties?

SEASOFT’s STEALTH™ and SUNRAY™ Booties are considered by the US military, professional and recreational divers to be the very best.

Cramps are an issue for most divers. Soft-soled dive booties cause the foot to flex continuously inside the foot pocket of their fins causing cramps. Most divers think this is an inevitable price to pay to dive or snorkel, it’s not!

SEASOFT uses a hard sole when manufacturing their boots. This eliminates the up and down motion of the foot inside the foot pocket of your fins that causes cramping.

By bypassing these small muscles, SEASOFT Booties use the large muscle groups to powerfully move you through the water. SEASOFT Booties have a money back guarantee - if you get cramps, we will send you another pair or you can return them. We have never had a diver return a pair!

Another good reason to buy a SEASOFT bootie. Divers can easily carry over a hundred pounds of gear; should you be wearing bedroom slippers OR athletic footwear?

The obvious answer, of course, is athletic footwear because an elevated heel and an arch support underneath the sole of your boot create stability and comfort. The elevated heel gives you the ability to safely carry your gear on sand, rocks and lava, or on wet docks and pitching boat decks. The arch support provides stability and supports the foot and ankle.

If you agree that athletic footwear is important, you should be wearing SEASOFT diving booties. Our competitors LOOK athletic from the outside but are not athletic where it counts, on the inside. If the heel is not raised, it's just a bedroom slipper!

SEASOFT diving booties utilize high quality neoprene, a fin guard, zip-keeper in both booties and 2 layers of Titanium Flake Foil Technology™ for heat retention in the STEALTH Booties™ and Glideskin™ in the SUNRAY Booties™.

So join the US military, police, sheriff and fire departments and tens of thousands of other divers in discovering just how warm, comfortable, safe and effective you can be in SEASOFT Booties.

Seasoft Ti Pro™ 5 mm Kevlar Gloves

SEASOFT Gloves have a reputation for warmth, toughness and comfort. That reputation started with the SEASOFT Ti PRO™ Kevlar Gloves.

• 75% of the surface area is KEVLAR™
  
• Pre-curved, boxed fingers
  
• No restrictive seam across the palm to flush water and restrict entry of your hand
  
• Drysuit glue used on seams
  
• Titanium Flake Foil Technology™ to deflect the cold and retain heat
  
• High quality, medium density neoprene
  
• QUAD Reinforced wrist strap with backing

Introducing a major innovation in wetsuit comfort; Reactive, the first wetsuit in dive to use Celliant® Infrared fabric, a responsive textile, that continuously warms the diver using their own body heat.

WHAT IS CELLIANT® INFRARED
The suit is made with scientifically proven Celliant® Infrared Technology - 13 thermo-reactive minerals woven into the fabric lining that convert body heat into infrared energy and reflect it back onto the diver. Medical studies have shown that infrared energy improves the body’s circulation. Increased circulation improves oxygen levels in the body, enabling you to use less energy, improving overall warmth and increasing your dive time.

KEEPING DIVERS WARMER
Reactive is the first dive suit of its kind to utilize Celliant® Infrared Technology. Because we’ve also incorporated our No-Stitch Technology (NST), a construction technique that virtually eliminates seam stitching – it’s all heat taped and sealed – the diver stays warmer by reducing flushing within the suit. Usually, we use that system for drysuits – this is the first wetsuit we’ve used it on. We’ve also incorporated a proprietary neoprene offering our highest degree of stretch, so it’s unbelievably comfortable and responsive to dive in. *Please call for availability.

Features and Benefits

• Velcro adjustment on collar features a booklet-style cover, to protect your suit from snags and pilling
• Seamless underarms for superior comfort and mobility
• Extra-long (21”) S-Lock2 back zipper with offset tooth design and PU coated zip tape guards against water entry
• Skin-to-skin double internal sealing zipper flap
• Full length puller with silicon print for easy grip; grip tab at base of the zipper
• Extra-long (11”) heavy-duty ankle zippers for easy donning
• Armor Flex 2.0 highly flexible, durable, abrasion resistant 3-D kneepads
• Anatomically correct pattern for three dimension fit throughout

Sizes

Introducing a major innovation in wetsuit comfort; Reactive, the first wetsuit in dive to use Celliant® Infrared fabric, a responsive textile, that continuously warms the diver using their own body heat.

WHAT IS CELLIANT® INFRARED
The suit is made with scientifically proven Celliant® Infrared Technology - 13 thermo-reactive minerals woven into the fabric lining that convert body heat into infrared energy and reflect it back onto the diver. Medical studies have shown that infrared energy improves the body’s circulation. Increased circulation improves oxygen levels in the body, enabling you to use less energy, improving overall warmth and increasing your dive time.

KEEPING DIVERS WARMER
Reactive is the first dive suit of its kind to utilize Celliant® Infrared Technology. Because we’ve also incorporated our No-Stitch Technology (NST), a construction technique that virtually eliminates seam stitching – it’s all heat taped and sealed – the diver stays warmer by reducing flushing within the suit. Usually, we use that system for drysuits – this is the first wetsuit we’ve used it on. We’ve also incorporated a proprietary neoprene offering our highest degree of stretch, so it’s unbelievably comfortable and responsive to dive in.

Features and Benefits

• Velcro adjustment on collar features a booklet-style cover, to protect your suit from snags and pilling
• Seamless underarms for superior comfort and mobility
• Extra-long (21”) S-Lock2 back zipper with offset tooth design and PU coated zip tape guards against water entry
• Skin-to-skin double internal sealing zipper flap
• Full length puller with silicon print for easy grip; grip tab at base of the zipper
• Extra-long (11”) heavy-duty ankle zippers for easy donning
• Armor Flex 2.0 highly flexible, durable, abrasion resistant 3-D kneepads
• Anatomically correct pattern for three dimension fit throughout

Sizes