Voyager 5 Regulator Bag

USWR Extreme Dive Pouch

Keep your essential SCUBA dive gear and tools at hand - carry back a mask, light, shears, knives, tools, SMB, reel, slates, camera, defogger, CPR mask, etc. The Extreme was originally developed for Public Safety Divers. PS Divers need quick and easy access to a back-up mask when using a FFM along with quick easy access to cutting tools in case of entanglement hazards. Come to find out, recreational and technical divers love the pouch as well.

The Extreme Dive Pouch is designed for use on a harness type BCD with a 2" waist strap, but can be mounted in several ways. It can be mounted on 2" webbing or can be mounted via the two stainless steel side d-rings (for example: to the rear of a backplate via 2 bolt snaps). The stainless steel d-rings on each side can also be used for attaching tools for quick access. The pouch has two large pockets (zipper on top) and one front pocket for smaller items. Zippers can be opened and closed in either direction, or divers can pre-set the zippers to help identify which pocket they are opening (for example: one pocket opens from the left side / the other pocket set to open from the right side of the pouch). 

• Dimensions: 9" Wide x 6" High x 3.5" Deep
• Weight: 10 ounces
• Three (3) zippered storage compartments with interior pockets
• Two large pockets contain a stainless steel d-ring for securing your items if needed
• Drain holes in each pocket
• Best dive pouch being manufactured in the U.S.A.
• Designed and hand-crafted from American-sourced materials
• Fabric: 1000 weight urethane coated, Dupont certified CORDURA® nylon
• Weather resistant (NOT waterproof)
• All zippers #8 YKK VISLON® self-locking
• Thread: Proprietary #92 bonded Solar Max nylon
• All seams double stitched and bound
• Monkey Fist Zip knots on all zippers
• #5 YKK Vislon self-locking zippers
• Choose from several vibrant colors
• Lifetime Warranty

• The OTS designed FFM Mask Bag prolongs the life of your full face mask.
  
• A large net type vent on the top of the bag provides greater air circulation which aids drying.
  
• Properly stowing the mask upside down in the bag allows the water to drain away from the second stage regulator and through the bottom of the bag via a large nylon grommeted opening.
  
• The bag has a dry compartment on the backside perfect for storing a supply hose or other small accessories
  
• It also has two mesh storage pockets; one found on the front and secured with a zipper and the second inside secured with a small Velcro® tab.
  
• The bag is made out of 420D nylon with polypro webbing, corrosion resistant nylon hardware: d-rings, straphooks, grommets, triglide (on the strap) and zipper sliders.
  
• It uses closed cell foam padding and a comes with a shoulder strap and a rubberized shoulder pad.