Poseidon Cyklon HP Port Adapter

On older Poseidon Cyklon 1st stage SCUBA regulators, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adapter can be used to attach a standard High Pressure Hose.

• Male end: 1/8"
• Female end: 7/16"
• Includes new gasket

Poseidon Cyklon Port Adapter

On older Cyklon 1st stages, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adaptor can be used to attach a standard Low Pressure Hose.

• Male end: 1/8"
• Female end: 3/8"
• pn: 0000-833 / 2415
• Do not use o-rings for seal. Use Cyklon gaskets which can be ordered here :
  Cyklon Port Gaskets

Aqua Lung / SeaQuest Style QD Adapter

• Convert any standard SCUBA LP regulator hose to an “Aqualung / SeaQuest Style” Quick Disconnect hose
• Installs to the second stage end of a regulator hose 
• Chromed brass construction with Viton o-rings
• Low pressure use only - below 200 psi 
• Compatible with: Aqualung / SeaQuest Air Source, Oceanic Air XS 2, US Divers Air Mic, Mares Air Control

Stainless Steel 2nd Stage Regulator Hose Quick Disconnect

• Add a quick-disconnect to most any regulator or full face mask
  
• Installs between low pressure regulator hose and second stage
  
• Click & Lock to prevent accidental disconnection
  
• Stainless Steel construction
  
• Low pressure use only - below 200 psi
  
• Factory cleaned - Viton o-ring
  
• P/N AC992

OmniSwivel 9/16"-18 Elbow for 2nd Stage SCUBA Regulator, 98deg

• 9/16"-18 Male Inlet
• 9/16"-18 Male Outlet
• Dimensions: 1-3/4"L x 5/8"O.D
• Solid Brass Construction
• Made with 02 compatible materials
• PN: EL-S

Brass 2nd Stage Regulator Quick Disconnect - XS Scuba

• Add a quick-disconnect to most any regulator or full face mask
  

• Installs between low pressure regulator hose and second stage

• Lock-down screw to prevent accidental disconnection
  

• Chromed brass construction

• Low pressure use only - below 200 psi

• Factory cleaned - Viton o-ring

• Part # AC990

LP Hose Splitter

• Attach to the second stage end of one low pressure regulator hose
• Allows the attachment of two low pressure regulator hoses (first stage ends)
• One 9/16”-18 male inlet to two 3/8”-24 female outlets
• Chromed brass construction
• Low pressure only - below 200 psi

Swivel LP Two Port Adapter for 1st Stage Regulator - XS SCUBA

• Reroute, or increase, the number of low pressure hoses coming off your first stage
• Chromed brass construction with Viton O-rings
• Low pressure only – below 200 psi
• (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
• p/n: AC902

OmniSwivel - Poseidon Extreme Elbow, 98deg

• 9/16"-18 Male Inlet
• Poseidon Extreme Female Insert Outlet
• Dimensions:
• Length: 1-1/2" x Width: 3/4" x Height: 1"
• Pressure Relief Build In
• Solid Brass Construction
• Made with 02 compatible materials
• PN: EL-PE

OmniSwivel High Pressure 1st Stage Pivot Swivel

This OmniSwivel pivot swivel is used for high pressure ports (pressure gauge). It allows your pressure gauge to swivel (instead of fixed) at the 1st stage connection.

• For High Pressure Hoses
• 7/16-20 Male to 7/16-20 Female.
• 90 degree angle, 360 degree rotation.
• Outer Dimensions: 2.3cm x 3cm
• PS-HP-1

• Rebreather / Technical Divers
• Search, Rescue and Recovery Agencies
• Police Departments and Fire Departments
• Military
• NASA

OmniSwivel Low Pressure Pivot Swivel, 1st Stage PS-LP-2

• 3/8"-24 Male Inlet
• 2 ports 3/8"-24 Female Outlet
• L Shaped
• 90 degree offset 
• Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-2

Low Pressure Pivot Swivel, 1st Stage PS-LP-4

• 3/8"-24 Male Inlet
• 2 ports 3/8"-24 Female Outlet
• T-Shaped
• 90 degree offset
• Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-4

SCUBA Hose To Hose Connector

• Connect two regulator hoses together to make one longer hose
• 3/8”-24 female x 9/16”-18 male
• Low profile 11.5mm height
• Brass construction with black chrome finish
• Low pressure use only - below 200 psi
• AC960

“Drysuit Style” QD Adapter

• Convert any standard regulator hose to a “Drysuit Style” Quick Disconnect Low Pressure SCUBA hose
•  Installs to the second stage end of a regulator hose
• Chromed brass construction with Viton o-rings
• Low pressure use only - below 200 psi
• Compatible with: Swedish CEJN couplers as found on many drysuit inflation valves, Zeagle Octo Plus and Beauchat Venturi

Standard Male BC Adapter - 1/4" NPT