Description

Tribolube 71 Resealable Tube

Oxygen Compatible Lubricant

Resealable Tube

Open & Closed Circuit Scuba Diving Systems

Wide Temperature Range

Extends component life

Made in the USA

Available in 7 gram tube or 14 gram tube

 

Features

TRIBOLUBE 71 primary characteristic is that it uses PTFE that has not been irradiated. Non-irradiated PTFE over long term exposure has demonstrated it does not corrode aluminum or anodized aluminum. Tribolube-71 has a very wide temperature range, nonreactive with strong acids, oxygen, fuels, and solvents. It is an excellent anti-wear, extreme pressure lubricant with long life. Tribolube-71 is qualified to MIL-PRF-27617 types 1, 2, & 3.

Technical Specs

Click Here Technical Specs

Description

Tribolube 66, (2 Oz) Syringe

A non-toxic, oxygen compatible lubricant

• Designed specifically for open circuit scuba diving systems
• Intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required.
• Qualified to MIL-PRF-27617, Type 1.
• Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.
• Made in the USA. Manufacturer occasional changes appearance of label, picture may be slightly different than current lable.

Technical Specs

Click Here For Tech Specs

Description

Tribolube EPO2 Protectant

• Non-ferrous metals protectant and Corrosion inhibitor
• 8-oz. pump spray bottle
• Widely used in scuba diving equipment
• Oxygen Compatible

Click Here for MSD Sheet

Technical Specs

Ozone Depletion Potential (ODP)	Zero
Boiling Point	90 °C
Flash Point	None °C
Density @ 25°C	1.88 g/cubic cm
Surface Tension	14 dynes/cm
Viscosity @ 25 °C	.75 cSt
Vapor Pressure @ 25°C	100 Torr
Heat of Vaporization	17 cal/g
Solubility of Water	14 ppm (wt)

Description

TRIBOLUBE 71

Non-toxic oxygen compatible lubricant.

Designed specifically for open and closed circuit scuba diving systems.

Primary characteristic is that it uses PTFE that has not been irradiated.

Non-irradiated PTFE over long term exposure has demonstrated it does not corrode aluminum or anodized aluminum.

Tribolube-71 has a very wide temperature range, nonreactive with strong acids, oxygen, fuels, and solvents.

It is an excellent anti-wear, extreme pressure lubricant with long life. Tribolube-71 is qualified to MIL-PRF-27617 types 1, 2, & 3.

Made in the USA

Features

Oxygen Compatible Scuba Lubricant for Static & Dynamic Applications.

Technical Specs Click Here for Tech Specs

Tribolube 2080 Light (2 0z Tube)

• Silicone grease compounds not for use in OXYGEN SERVICE.
• Used widely in the SCUBA Diving industry in non-oxygen applications
• Some consumers are switching to these higher quality greases to replace the silicones they are currently using.
• Replaces Dow Corning 111
• Made in the USA

Various components of common scuba equipment such as DIN-fittings and regulator second stage inlets require thread sealants, but Locktites ARE NOT O2 compatible. Instead, LOX-8 past can be subsitituted to mildly freeze such threaded components. This greenish colored fluorocarbon is fully O2 compatible. 10 gm. jar.

• O2 compatible
• 10 gm. jar

Description

Tribolube 71 (5g Tear & Tuck Tube) Lubricant For Open & Closed Circuit Diving

 

• Primary characteristic is that it uses PTFE that has not been irradiated.
• Non-irradiated PTFE over long term exposure has demonstrated it does not corrode aluminum or anodized aluminum.
• Tribolube-71 has a very wide temperature range, nonreactive with strong acids, oxygen, fuels, and solvents.
• It is an excellent anti-wear, extreme pressure lubricant with long life.
• Tribolube-71 is qualified to MIL-PRF-27617 types 1, 2, & 3.
• Made in USA

Features

A non-toxic, oxygen compatible lubricant designed specifically for open and closed circuit scuba diving systems in a convenient and economical 5 gram tuck & tear package. Technical Specs
Click Here For Technical Specs

Description Tribolube 66 (.5 oz tube)

• A non-toxic, oxygen compatible lubricant
• Designed specifically for open circuit scuba diving systems
  
• Intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required.
  
• Qualified to MIL-PRF-27617, Type 1.
• Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.
• Made in the USA
• Tube: 1/2 oz / 14g
  

Technical Specs Click Here For Tech Specs

Description

Tribolube 2080 (2 oz tube):

• Silicone grease compounds not for use in OXYGEN SERVICE.
• Used widely in the SCUBA diving industry in non-oxygen applications
  
• Some consumers are switching to these greases to replace the silicones they are currently using.
• Replaces Dow Corning 111
• Medium Weight

Technical Specs MSD Sheet