Fixed Waist Staging Ring

Fixed Waist Staging Ring is the complimentary partner to the Shoulder Drop Dee (SR-1). Used as upper and lower clip-off locations for slinging bottles, together they allow the diver efficient one-handed stage bottle management. Hunting for the D-ring with one hand and clipping off with the other is history. The WR-2 may be positioned comfortably anywhere on the waist belt or directly over the hip because of its contoured base. Ring is oriented at approximately 40° to the base plate. Positively locks on standard 2″ web. Very popular with cold water, mitted divers. By Manta Industries / Highseas Millwork.

Drop Dee for Shoulder Straps

The SR-1 is a rigid, easy to hit ring with only 1-1/4″ of standoff at approximately 10°, yet it will accommodate the largest clips and carabineers. It offers the most efficient means for slinging bottles to the harness. Especially popular with mitted, cold water divers.

• Readily accepts standard 2″ webbing.
• May be comfortably located any where on the shoulder because of its contoured back, and locks positively on the web – will not slide down even with a load of stage bottles.
• Works well in combination with the WR-2 (Waist Ring).
• By Manta Industries / Highseas Millwork

• 90 Degree Billy Ring
• 316 Stainless Steel

• 45 Degree Billy Ring
• 316 Stainless Steel

BCD Harness Utility Keeper - Pair

The Highseas Utility Keepers are ideal for holding down backup lights but can also be used on the shoulder strap to retain your inflator hose.

• Webbing not included
• Mant Industries / Highseas Millwork
• KP-UT

CLIP-SD03

• Brass D-ring and clip
  
• Overall size 4.5"
  
• Maximum weight limit: 330 lbs

CLIP-SD02

• Brass D-Ring and clip
  
• Overall size 3.5"
  
• Maximum weight limit: 265 lbs

NRS Solid Gate Paddle Carabiner

Prevent paddles from escaping downstream. This large 'biner (4.75"L x 3"W) has a 1.375"W gate opening to accommodate most paddle shafts. 15961

Not intended for climbing or rescue applications.

This product is not CE approved.

SMC Force D Screw-Lok Carabiner

The SMC Force D Screw-Lok Carabiner is an affordable, rock-solid design that has proven itself in the field around the globe. Screw-Lok provides tried-and-true locking, without the complications and aggravations of other methods.

• ISO Cold Forging process delivers unparalleled strength to weight ratios.
• Classic D shape carries loads toward the stronger, non-gated side.
• Hooded gates offer smooth rope-bearing surfaces.
• Generous gate clearances with deep baskets provide effortless clipping.
• Locks with an effective and effortless Screw-Lok sleeve.
• Made in the USA.

Specifications:
1kN = 225 lbs of force
Strength = 31 kN

Omega 1/2" Std. D Screw-Lok NFPA Carabiner

Large D shape for great handling, huge gate opening and massive strength! At a rated strength of 72 kN, it's one of the strongest carabiners in the world! Heat-treated, half-load tested (over 8000 lbs.) and built to exacting standards, the " Steel Standard D is one very fine steel carabiner. 1412

Specifications:
1 kN = 225 lbs of force
Strength Closed: 72 kN
124.5mm L x 70.6mm W

Omega Modified D 1/2" Aluminum Screw-Lok Carabiner

Omega G-First NFPA Screw-Lok Carabiner

The Omega G-First NFPA Aluminum Screw-Lok is the world's lightest carabiner to earn the full-strength "General" rating from the National Fire Protection Association! Tough, convenient and bright red for visibility.

• Rated to 40kN, this 'biner weighs only 4.6 oz. - almost 10% lighter than other G-Rated aluminum carabiners and less than half the weight of steel carabiners.
• The G-First is ISO Cold Forged from aircraft-quality, heat-treated aluminum.
• It feature a KeyLock Nose to prevent snagging on webbing, ropes and harnesses.
• The super smooth screw lock ensures easy operation.
• The G-First is strong, easy to operate and won't weigh you down.
• OPGF36LNFPA

Specifications:

Omega 1/2" Modified D Screw-Lok Carbiner

Same "D" shape as the 7/16" model, but with bigger material for increased strength. Same great handling and use characteristics but with a strength rating of 65 kN (that's over 14,000 lbs.!). OP12S38L

Specifications:
1 kN = 225 lbs of force
Strength Closed: 65 kN
113.3mm L x 68.6mm W

• Material: Steel
• Strength Closed: 65 kN = 14625 lbs.
• Strength Open: 24 kN = 5400 lbs.
• Dimensions: 113.3 mm L x 68.6 mm W
• Gate Opening: 22 mm
• Weight: 269 g
• Locking Mechinism: Screw lock