Over the years, kayakers, surfers and other water-sportsmen have been using the Spare Air as a rescue safety device. Their only complaint - they needed something that was "hands free." The Xtreme sport solves this by reducing the size of the air tank and mounting the unit in a neoprene vest in a chest pocket. Now your next breath is only inches away.

Features

Regulator Body - Our simple rugged design utilizes the same time proven technology found in typical regulators used by SCUBA Divers around the world. Our always-on, breathe on demand, balanced single stage regulator is easy to maintain and service.

Pressure Indicator - The standard indicator is easy to read by the White Indicator Pin rising up when the Spare Air has filled to 3000psi. A Dial Gauge Pressure Indicator is available as an optional accessory.

Purge Button - Clears the regulator and empties the Air Tank.

Mouthpiece - Standard regulator mouthpiece carried by SCUBA Diving Shops everywhere and is the same model used on most regulators.

Check Valve Refilling Port - Remove the cover and attach the yoke style Refill Adapter (patent pending). Attach the other end to a filled SCUBA tank and in 30-60 seconds, your

Specifications

	Model		Watersport
	1.1 cubic feet of air, about 20 normal breaths Included neoprene vest fits under or over PFD Small size stays out of the way Simple mount easy to reach for a quick breath Enough air to help remain calm while resolving many short, out of breath emergency situations. Breathe on demand regulator, no complicated instructions Refill from any filled SCUBA tank.
	Maximum Capacity		1.1 cu ft / 31.15 liters
	Length		7.25" / 18.42 cm
	Diameter		2.25" / 5.71 cm
	Maximum Pressure		3000 psi / 200 bar
	Weight (full)		1.23 lb. / .58 kg
	Surface Breaths*		20
	Water Volume		9.46 cu in / .155 liters
	Suggested Retail Price		$249.00
*Based on 1.6 liters per breath

	Model		Dual Sport (can be used for SCUBA & watersports)
	1.7 cubic feet of air, about 30 normal breaths All the features of the Watersport Model with larger air capacity Size preferred by military agencies worldwide Proven design, in production since 1979 with over 100,000 units in use
	Maximum Capacity		1.7 cu ft / 48 liters
	Length		8.75" / 22.23 cm
	Diameter		2.25" / 5.71 cm
	Maximum Pressure		3000 psi / 200 bar
	Weight (full)		1.51 lb. / .687 kg
	Surface Breaths*		30
	Water Volume		13.7 cu in / .28 liters
	Suggested Retail Price		$259.00
*Based on 1.6 liters per breath

HEED 3 - The Original Helicopter Emergency Egress Device

• Provides lifesaving air needed to egress from a downed aircraft or a rolled vehicle in the water.
• Ideal for all helicopters, fixed wing aircraft, float planes, watercraft and vehicles that operate around possible water emergencies.
• Protects personnel from inhaling dangerous and lethal toxic fumes from fire or smoke.

Features

Why HEED 3

Sometimes, we get a question "Why should I purchase a HEED 3 over other manufacturers of safety breathing devices?"

The answer is simple: HEED 3 uses a proven SCUBA regulator that has been saving lives for 30 years. The first version of the HEED was a repackaged Spare Air, ordered by the US Navy to assist in training and helicopter water emergencies. Since then, hundreds of organizations, governments, agencies and individuals [see a partial list] have taken advantage of our reliable design. And the best reason for a HEED 3 is "simplicity."

• Simple to use: the "always on" design is always ready to deliver air when you need it. There are no moving parts. The dial gauge is easy to read and clearly indicates if the tank is full and ready to us. Just place the mouthpiece in your mouth and breath normally [be sure to read owner's manual before using].
• Simple to maintain: the unit requires no routine maintenance except after use or once a year for a simple inspection and o-ring replacement. Every 5 years, the tank should be hydrostatically tested. The unit can be serviced at any Spare Air certified SCUBA shop or by sending directly to us.
• Simple to refill: the unit can be filled using any breathing air compressor or from a filled SCUBA tank [3000 psi]. See our refilling page for more.
• Simple to mount: the holster included with your HEED 3 is designed to mount easily to any molli vest or belt. The possibilities are only limited by your imagination. See a few examples on our mounting page.
• Simple to travel with: the small size and light weight make the HEED 3 ideal for commercial airline travel. Although the unit cannot be in service during the flight, once you arrive, your unit can easily be refilled and be ready when you need it. More details are available on our travel page.
• Simple to purchase: from a single unit to hundreds, the HEED 3 is available for shipment today. Call u Technical Specs

  Part Number	175-001
  Product Length	8.75" [22.23 cm]
  Product Diameter	2.25" [5.71 cm]
  Product Weight(full)	1.51 lbs [.687 kg]
  Cylinder Pressure Ratings	3000 PSI [200 BAR]
  Cylinder Volume	1.7 cu ft [48 liters]
  Cylinder Material	Aluminum - Black Anodized
  Pressure Relief	Integrated in regulator
  Regulator Type	Balanced Single Stage
  Operational Temperature	-22°F [-30°C] +158°F [+70°C]
  Duration of Air Supply	Approximately 30 breaths at surface
  Altitude Limits	Tested at up to 35,000 feet (10,500 meters)

How to Fly with Spare Air

When carrying SPARE AIR on a commercial aircraft, the system must be empty and according to TSA regulations, the regulator must be unscrewed from the cylinder so they can be sure that it is empty.

1. To empty all the air out of the SPARE AIR press the Purge Button until no more air is released. Unscrew the regulator from the cylinder counter-clockwise (no special tools are needed – it is screwed on hand tight).
2. If the regulator does not unscrew easily DO NOT force it or use tools, instead soak the entire SPARE AIR in a 1-1 vinegar & water solution overnight to loosen any salt corrosion. Leave o-ring, washer and exhaust discs on the regulator.
3. Place the regulator and cylinder in a Ziploc plastic bag to protect and keep them clean. (Option - purchase the "SPARE AIR Travel Pack" which includes its own carrying bag - see below.) Keep SPARE AIR regulator and cylinder threads clean and dry. Include SPARE AIR Owners Manual so TSA employees can refer to it if they have questions.
4. Pack SPARE AIR in your checked or carry-on baggage.
5. Reattach the regulator and cylinder and refill SPARE AIR when you reach your dive destination. You may lightly lubricate the tank o-ring with a small amount of silicone spray or grease - NEVER use a hydrocarbon based oil. DO NOT force regulator onto tank - if you feel resistance stop and unscrew and start again.
6. Replace tank o-ring after product has been disassembled and reassembled 3 times, or o-ring shows signs of wear or air leakage. Tank O-ring size is 016 and you should be able to purchase from any dive shop.

Air Compressor Refill Adapter (920C)

Air Compressor Refill Adapter so you can fill your own Spare Air bottle from a standard SCUBA air compressor!

Refill Adapter (patented, P/N 910S)

One of the best features of Spare Air is that you can simply and easily refill it yourself - allowing you to be in control of your own safety!

• Spare Air is easily refilled from your own SCUBA tank in about 1 minute.
• Simply attach the adapter that is included in every Spare Air package to your own SCUBA tank.
• There is no need to make a separate trip to the dive store to get Spare Air refilled.

Spare Air Model 300 - Nitrox (300PK-N)

Do you dive with Nitrox?

• If so this is the SPARE AIR for you. It is the perfect addition to your Nitrox System, with quick and easy refills from your own Nitrox SCUBA tank.
• Nitrox ready up to 40% EAN
• 3.0 cubic feet of air
• Refillable to 3000 psi off any Nitrox SCUBA tank or air compressor with included refill adapter (patented)
• Easily attaches to your BC with included holster and safety leash
• Small, hands-free, nearly neutrally buoyant
• Breathe on demand regulator -No complicated instructions
• Completely redundant back-up miniature SCUBA system
• Faster than buddy breathing and easier than an octopus

• Maximum Capacity 3.0 cu ft / 85 liters
• Length 13.4" / 34 cm
• Diameter 2.25" / 5.71 cm
• Maximum Pressure 3000 psi / 200 bar
• Weight (full) 2.17 lb. / .985 kg
• Surface Breaths* 57
• Water Volume 26.62 cu in / .42 liters

• Maximum Capacity 3.0 cu ft / 85 liters
• Length 13.4" / 34 cm
• Diameter 2.25" / 5.71 cm
• Maximum Pressure 3000 psi / 200 bar
• Weight (full) 2.17 lb. / .985 kg
• Surface Breaths* 57
• Water Volume 26.62 cu in / .42 liters

• Maximum Capacity 1.7 cu ft / 48 liters
• Length 8.75" / 22.23 cm
• Diameter 2.25" / 5.71 cm
• Maximum Pressure 3000 psi / 200 bar
• Weight (full) 1.51 lb. / .687 kg
• Surface Breaths* 30
• Water Volume 13.7 cu in / .28 liters