Poseidon Cyklon HP Port Adapter

On older Poseidon Cyklon 1st stage SCUBA regulators, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adapter can be used to attach a standard High Pressure Hose.

• Male end: 1/8"
• Female end: 7/16"
• Includes new gasket

Poseidon Cyklon Port Adapter

On older Cyklon 1st stages, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adaptor can be used to attach a standard Low Pressure Hose.

• Male end: 1/8"
• Female end: 3/8"
• pn: 0000-833 / 2415
• Do not use o-rings for seal. Use Cyklon gaskets which can be ordered here :
  Cyklon Port Gaskets

Poseidon Cyklon 2nd Stage Regulator - Hose Adapter

• Designed to adapt the Cyklon 2nd Stage to a modern-day LP 2nd Stage Regulator Hose
• Poseidon Cyklon Male to 9/16"-18 Female Insert, used for Low Pressure
• Solid Brass Construction
• Made with 02 compatible materials
• SYM-CFI

Stainless Steel 2nd Stage Regulator Hose Quick Disconnect

• Add a quick-disconnect to most any regulator or full face mask
  
• Installs between low pressure regulator hose and second stage
  
• Click & Lock to prevent accidental disconnection
  
• Stainless Steel construction
  
• Low pressure use only - below 200 psi
  
• Factory cleaned - Viton o-ring
  
• P/N AC992

OmniSwivel Adapter for Poseidon Xstream Female to 9/16" Male Adaptor, with built-in Pressure Relief Valve

Older Poseidon Xstream 1st stage regulators did not have an OPV in the 1st stage. The relief valve was in the 2nd stage hose. If the user wanted to use a standard 9/16" hose vs. the standard Poseidon hose, an adapter would be needed for the 2nd stage. The user would also need to add an OPV to the 1st stage.

This OmniSwivel Adapter has the OPV built in. Now you can use a standard 2nd stage SCUBA hose and not have to add an OPV to your Poseidon 1st Stage.

OmniSwivel 9/16"-18 Elbow for 2nd Stage SCUBA Regulator, 98deg

• 9/16"-18 Male Inlet
• 9/16"-18 Male Outlet
• Dimensions: 1-3/4"L x 5/8"O.D
• Solid Brass Construction
• Made with 02 compatible materials
• PN: EL-S

OmniSwivel Quick Disconnect Set: Streamline & 2nd Stage Regulator

• Female QD has lock built into sleeve.  Once connected, rotate the sleeve counter-clockwise 90deg to engage the lock.
• Female QD: 9/16"-18 Male (Connects to a standard regulator hose)
• Male QD:Connects to any standard 9/16"-18 2nd stage regulator fitting.
• Male attaches to any 9/16"-18 male fitting or standard thread 2nd stage regulator.
• Solid Brass Construction
• Made with 02 compatible material
• PN: QD-YF-S

Brass 2nd Stage Regulator Quick Disconnect - XS Scuba

• Add a quick-disconnect to most any regulator or full face mask
  

• Installs between low pressure regulator hose and second stage

• Lock-down screw to prevent accidental disconnection
  

• Chromed brass construction

• Low pressure use only - below 200 psi

• Factory cleaned - Viton o-ring

• Part # AC990

Swivel LP Two Port Adapter for 1st Stage Regulator - XS SCUBA

• Reroute, or increase, the number of low pressure hoses coming off your first stage
• Chromed brass construction with Viton O-rings
• Low pressure only – below 200 psi
• (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
• p/n: AC902

OmniSwivel High Pressure 1st Stage Pivot Swivel

This OmniSwivel pivot swivel is used for high pressure ports (pressure gauge). It allows your pressure gauge to swivel (instead of fixed) at the 1st stage connection.

• For High Pressure Hoses
• 7/16-20 Male to 7/16-20 Female.
• 90 degree angle, 360 degree rotation.
• Outer Dimensions: 2.3cm x 3cm
• PS-HP-1

• Rebreather / Technical Divers
• Search, Rescue and Recovery Agencies
• Police Departments and Fire Departments
• Military
• NASA

Low Pressure Pivot Swivel, 1st Stage PS-LP-4

• 3/8"-24 Male Inlet
• 2 ports 3/8"-24 Female Outlet
• T-Shaped
• 90 degree offset
• Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-4

OmniSwivel 90 degree Swivel w/ 1/4" Extension, PS-LP-3

• OmniSwivel
• 3/8"-24 Male Inlet
• 3/8"-24 Female Outlet
• Built in 1/4" Extension
• 90 degree offset Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-3 

Standard Male BC Adapter - 1/4" NPT