No Bump - No Barb Mouthpiece Ties for attaching your regulator mouthpiece.

• Improve comfort and safety
• Low profile and smooth with head height of .103"
• Trimmed stub retracts into cavity with head
• 7.5" Lenght by strap width of .178" and head width of .330"
• Strong: 50 pound tensile strength
• Compatible with "Clinch and Trim" guns
• Black
• Package of 5

Poseidon Cyklon HP Port Adapter

On older Poseidon Cyklon 1st stage SCUBA regulators, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adapter can be used to attach a standard High Pressure Hose.

• Male end: 1/8"
• Female end: 7/16"
• Includes new gasket

Poseidon Cyklon LP Port Adapter

On older Cyklon 1st stages, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.

If you have an older style 1st stage, this adaptor can be used to attach a standard Low Pressure Hose.

• Male end: 1/8"
• Female end: 3/8"
• Do not use o-rings for seal. Use Cyklon gaskets which can be ordered here :
  Cyklon Port Gaskets

Poseidon Cyklon Regulator LP Hose

Poseidon Cyklon LP Hose. Used for connecting 2nd stage Poseidon Cyklon regulator to 1st stage Cyklon. If you have an early model Cyklon 2nd stage, you might find that the threads on the LP hose may no fit a newer model Cyklon. In which case you will either need an adapter or this new LP Hose with the updated threads.

Not only unique in style, durability, reliability and longevity, the Cyklon is also unique in the type of hose used to connect to the 2nd Stage.  This hose LP UNF 3/8 Hose is used to connect the Cyklon Second Stage regulator to its First Stage.  The connection point between the Cyklon Second Stage and the hose is of a unique design and is not the same as most conventional Second stage regulators currently manufactured, so this hose is not appropriate for non-cyklon regulators.

*An adapter (0000-833) would be needed to use this hose on older First Stages that have G 1/8 port threads.

Key Features:

• Hose is for Cyklon 2nd stage only
• Multiples sizes available.

Miflex 2 Xtreme High Performance Specialist Diving Regulator Hoses

• Extreme Abrasion Resistance
• MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hose
• Patent-pending MIFLEX double braiding design
• Polyurethane compound liner
• Polyester inner layer with nylon outer layer braiding
• Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
• MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
• Double braiding also resists UV rays out of the water, extending the life span of the hose
• Oxygen cleaned and tested at the factory
• Lightweight and Flexible
• More than 30% lighter in weight when compared to rubber hoses of the same length
• Kink-resistant design
• Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

The Xtreme high performance range of diving hoses has been developed in cooperation with expert divers for a superior in depth performance. A team of Miflex 2 engineers analyzed the low point of traditional low pressure diving hoses. The fruit of their research is the Xtreme high performance range. Xtreme hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers often encounter. The patent-pending Xtreme double braiding also resists UV rays out of the water, thus extending the life span of the hoses. Unlike the traditional hoses, the Xtreme nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeves. The result? Performance and durability in extreme situations. Tie the Xtreme hose in a tight knot and the flow of air remains continuous through the hose. Now that’s versatility! The Xtreme also achieves a higher burst pressure – more than double when compared to most traditional hoses. And in the event of a physical breach, Xtreme hoses actually work to reduce the amount of air lost. How? The advance Xtreme nylon safety braiding actively shrinks under pressure, reducing the rate of air loss and buying valuable time. Xtreme hose production is carried out on automatic assembly and testing lines designed and manufactured exclusively by Miflex. Each and every Xtreme hose is subjected to more than 30 individual safety and specification checks. Any hose found not to meet the exact Miflex standard is immediately scrapped.

Inspection and Use of Miflex Xtreme LP diving hoses
Miflex Xtreme LP diving hoses are high performance hoses which are lighter and more flexible than traditional diving hoses. Just like carbon fibre has advantages over steel, carbon fibre performs differently and must be cared for and used differently than steel. Likewise, careful use and inspection is critical to the safe use of your Miflex Xtreme LP diving hose.

While in storage, or during transport of your hoses to or from storage, your hoses could become damaged in a number of ways. Never use your hose as a carrying or hanging handle for the tank. Before every dive, carefully inspect your hoses for damage, wear and tear. Pay particular attention to the area near the fittings. If your hoses show any sign of wear, no matter how slight, immediately replace the hose.
During a dive, and unknown to you, your hoses could be caught on sharp rocks, twisted or subjected to other stresses. After every dive, carefully inspect your hoses for damage, wear and tear. Pay particular attention to the area near the fittings.
Never leave your hoses dangling with any regulator installed, especially when they are without pressure. Always secure the hoses to your jacket with hooks or straps, but leave sufficient freedom for movement. These hooks or straps should be fixed directly to the regulator, or close to the hose fittings. Never secure your hose in a manner which could constantly flex or bend in the same location (i.e. create a “hinge effect”). Continuous bending at the same pivot point will shorten the life of your hose.
Never over-flex your hose. Never fold the hose back onto itself. If your hose is too long, you may loop it and secure it in place with a section of rubber tubing (such as the inner tube of a bicycle tire). However, the minimum bending radius must be at least 3.5 times the outer diameter of the hose. For example, if the outer diameter of your hose is 12mm, then the minimum bending radius (as measured to the inside of the hose) is 42 mm. Never allow the weight of your air tank to impact or rest on any part of your hose. To prevent personal injury and damage, install the low pressure hose ONLY into a low pressure outlet of the first stage regulator

Inspection Tips

• Miflex hoses are manufactured to the highest standard in excess of the EN250 requirements. The Miflex brand is laser printed on all hoses to ensure recognition of the Quality of our products. Miflex hoses are quality guaranteed and each hose is 100% tested. All materials are RoHS approved with no hazardous substances used in our manufacturing process.
• Guaranteed with our commitment to maintaining exceptional quality.
• If there is scuffing on the outer layer of the hose, especially when used in cave diving type situations, where the hose could rub against sharp or uneven surfaces, replace the hose.
• If there are more than six loose threads in the same area on the outer layer of the hose, replace your hose.
• If there is any damage or excessive scale build-up on the hose fittings, replace your hose.
• Never cut your Miflex hose and reconnect any type of fitting to the hose. The hose will suddenly and unexpectedly fail at the fitting.

Poseidon Extreme OmniSwivel Version 2.0

Description: 

• OmniSwivel for Poseidon Extreme Stage Regulator
• 3 way 360deg rotation
• 9/16"-18 Male to Poseidon Extreme Female Insert
• Version 2.0 with a set screw that captures the spindle-screw and prevents it from ever being able to back out.

Details:

• Solid brass construction for maximum durability.
• Oxygen Compatible Materials and O-Rings.
• Viton 75 Orings with Tribolube 71 lubricant

Omni products are well known to the high tech divers and rescue workers that need total stability such as:

• Rebreather / Technical Divers
• Search, Rescue and Recovery Agencies
• Police Departments and Fire Departments
• Military
• NASA

Poseidon Xstream Deep w. Octo & Black Gauge 

The benchmark for high performance regulators. Whether you dive with air, trimix or oxygen, the Xstream outperforms all other regulators. First regulator certified to 200 m / 656 ft. The preferred choice for the US Navy, Coast Guard, NYPD among others.

• Xstream Deep first stage
• Xstream Deep second stage
• Xstream Octopus
• 1 x LP-Hose 70 cm / 27.5"
• 1 x LP-Hose 90 cm / 35,5"
• Cirrus pressure gauge (bar and psi)

KEY PERFORMANCE FEATURES:

• No manual adjustment of breathing resistance needed, performs equally well at all depths
• Side purge prevents current-induced free flow, for example when scootering.
• Side vent diverts bubbles from face.
• EAN 40 ready and compatible
• Ambidextrous, works perfectly either way up, from left or right side
• No environmental sealing required for cold water
• Suitable for air, nitrox 50% and trimix.

XSTREAM RANGE

The objective; design the most reliable 1st stage in the world. A patented ruby ball seal is automatically positioned by the floating seat which balances any upstream pressure equally with the pressure adjustment spring, maintaining the benefits of having a perfect ball as the sealing element without the risks that follow with incorrect sealing pressures. This makes the Xstream Range self-balancing, giving the same high performance, irrespective of the pressure in the cylinder.

Added to this the range has a built in anti freeze protection in its construction. The TDA (Thermo Dynamic Antifreeze) ensures that the through-flowing water keeps the ice away, entirely without fluids or extra diaphragms.

Low Pressure Regulator Hoses

High quality low pressure rubber hose for scuba regulators.

• 3/8 - 24 UNF Male to 9/16 - 18 UNF Female
• WP: 400 psi
• BP: 2000 psi

Poseidon Xstream Regulator 2nd Stage Exhaust Cover

Update or replace your worn out or faded Xstream 2nd Stage Regulator Exhaust Cover. Try a new color! All covers are the same, it does not make a difference what cover your regulator came with, now you get to choose the color. Some divers like to color coordinate, some Tech divers like certain colors to represent a specific blend of gas.

MiFlex XT-Tech Regulator Hoses

Stainless Steel 2nd Stage Regulator Hose Quick Disconnect

• Add a quick-disconnect to most any regulator or full face mask
  
• Installs between low pressure regulator hose and second stage
  
• Click & Lock to prevent accidental disconnection
  
• Stainless Steel construction
  
• Low pressure use only - below 200 psi
  
• Factory cleaned - Viton o-ring
  
• P/N AC992

Poseidon Hose Adapter

• Convert any standard regulator hose to fit the first generation Poseidon X-Stream second stage
  
• Fits any Poseidon second stage with M31-1.5mm inlet threads
  
• Brass construction with black chrome finish
  
• Does not have a built-in relief valve
  
• Low pressure use only - below 200 psi
  
• P/N AC980 - XS Scuba

Description

Poseidon Cyklon 1st Stage Regulator -DIN

First stage for the Cyklon 5000 and the Cyklon metal. The first regulator in the world with a single hose and the demand valve situated at the mouth. Thanks to its well-tested construction and design, the Cyklon is still the first choice of the German Navy and many others.

Features

• Two high pressure ports
• Four low pressure ports
• DIN G 5/8 connection

Technical Specs

• Description: Diaphram-actuated, balanced.
• Connecting threads for primary pressure: G 5/8-max 4350 psi / 300 bar accord. SS 2600/K and DIN 47/5 or yoke connection accord. SS 2603 and ANSI/CGA VI: 1987
• Primary Pressure: Max 4350 psi
• Secondary Pressure: Max 174 psi
• Air Flow: Approx. 1050 l/min
• Inhalation resistance at 115 l/min: max 40 mm of water
• Exhalation resistance: max 20 mm of water
  

Outlet Connections

• One outlet marked R for second stage (max airflow): UNF 3/8" - secondary pressure
• Three outlets marked LP for drysuits, BCDs, hookah supply, safety second stage, etc: .UNF 3/8" - secondary pressure
• Two outlets marked HP for pressure gauge: UNF 7/16" - primary pressure

Description

Poseidon Xstream Deep Regulator is the regulator of choice for any demanding divers that dive with air or trimix with a maximum of 21% oxygen. New Poseidon Xstream Regulators come with an OPV (over pressurization valve) in the 1st stage, and use a standard LP hose with an adapter on the 2nd stage. Excellent choice for rebreathers.

• Outstanding performance
• Certified to 200 meters / 656 ft!
• Product: 0100-000

Features

• Will give you enough air regardless of depth.
  
• The obvious choice for tech divers.
• Small, light and loaded with high tech. No up or down, side exhaust and can handle all conditions.
• Excellent cold water regulator, perfect for PSD divers.
• Trimix and air
• 5 LP and 2 HP-ports
• Low WOB - Servo assisted
  
• Certified to 200 m / 656 ft
• Delivered with a 70 cm hose
  

XSTREAM 1ST STAGE

• The first stage is a balanced rolling diaphragm ball valve producing extreme leak tightness. Conventional designs are sensitive to wear, misalignment, and manufacturing precision. A ball always finds its correct place.
• Combined with the 2nd stage, the enormous capacity of the 1st stage make the regulator meet the EN 250 breathing performance requirements even at as low as 16 bar (232psi) cylinder pressure. This means that you gain an extra 34 bar (493 psi) of gas compared to most other regulators!
• The Xstream construction requires less o-rings than any other regulator. Except for sealing the blind screws (3-4), there is just 1 sealing o-ring (semi-static) in the bottom mounted versions and 2 in the side mounted.
• The hose routing is developed to be optimized for a redundant system, using two regulators. The HP ports are positioned to accommodate the use of gas monitoring computers e.g. first stage mounted HP sender/receive units

XSTREAM 2ND STAGE
A number of features greatly improve safety and ease of use:

• If debris has degraded the function of the exhalation check-valve, it can easily be reached and corrected by just twisting off the diffuser. It is the only part which needs to be disassembled, and if it gets lost during the operation, the regulator will continue to function but must only be used for immediate ascent.
• In case of a malfunction in the 1st stage causing excessive intermediate pressure, the safety valve integrated in the1st stage will bleed off the excessive gas. This system both indicates to you that something is wrong so that you can take action, and because of the up-stream servo-valve technique, allows the regulator to continue to breath normally.(conventional downstream regulators are likely to free-flow in such a situation).
• Integrated surgical hose fixing points safely secures the regulator to the diver, but in an emergency allows a distressed buddy to retrieve the regulator without undue stress to the diver.
• The dead air space is low at just 49.5 ml (3 in3) making CO2 figures (hypercapnia) minimal. Inhalation resistance is incredibly low and unaffected by depth and breathing pattern.
• Because of the unique Poseidon valve technology, there is no need for external adjustments.
• Xstream is fitted with the new ergonomic mouthpiece Poseidon AIR, with asymmetrical lugs for the most comfortable bite.
• All diaphragms are protected so that a strong current or using a scooter or tug does not affect either inhalation or exhalation.
• A minimal number of moving parts, coupled with thermodynamic engineering, ensures the safe use in an extremely cold environment.

POSEIDON T.D.A

• Xstream has a built-in Poseidon T.D.A, ThermoDynamic Anti-freeze, which requires no maintenance. It is always there, doing the job. It is thermodynamically protecting the parts which must not freeze.
• It is identified by the large slots in the cover, allowing the heat energy of the water to re Technical Specs Approved to depth (m/f) 200/656 (gas dep.)
  IP (bar/psi): 8,5 / 123
  Air:Yes
  Trimix: Yes (max 21% oxygen)
  Nitrox 50% No
  Oxygen (99,95%): No
  Working pressure 300bar: Yes
  Built in anti freeze prot.: Yes
  O-rings: Nitril/EPDM
  US Navy tested: Yes
  Oxygen Approved (EN738-1): Nej
  NORSOK approved: Yes
  EN250 approved (cold water): Yes
  CE Cold water approved: Yes
  2nd stage Xstream Deep Mk3
  Color Black
  Material ASA/TPU
  Stainless steel
  Brass
  Weight (g/lb) 152/0.33
  Volume (ml/cuin) 49,5/3.0
  Valve technology Upstream
  Flowrate (l/cuft per min) 2150/76
  Oxygen cleaned No
  Servo assisted valve Yes
  Overpressure valve built in to the LP hose No
  Dis-mountable w/o tools Yes
  Push button on side Yes
  Swiveling Yes
  Non keyed (no up or down) Yes
  
  Xstream Deep first stage
  Color: Black
  Technology: Roll diaphragm
  Material: Brass
  Valve technology: Spheric
  Wheel mounted: Side
  LP ports 3/8: 5
  HP port 7/16: 2
  Flow rate (l/min): 5500
  O2 clean: No
  DIN G5/8: Yes
  EN144-3 compatible: No
  Separate yoke: Accessory
  Zytel HP seat: Yes
  Built in overpressure valve: Yes
  Anti-freeze protected: Yes
  Xstream Deep Mk3

POSEIDON CYKLON X METAL COMPLETE KIT

By combining the finest and most powerful, cold water juggernaut Xstream first stage with the 60+ year old, trustworthy and always improving, world famous Cyklon second stage, we have created a truly robust and reliable regulator. This perfectly breathing regulator is for any diver who wants the power and reliability of the Xstream with the durability and downstream capabilities of the Cyklon.

Cyklon Metal encases the second stage in high quality brass for even more robustness and style.

• Side purge prevents current-induced free flow
• Side vent diverts bubbles from face
• Works perfectly either way up, or from left or right side
• Extremly durable
• No environmental sealing required for cold water
• Weight (g): 2100.00

Technical Specs

• Air: Yes
• Anti-Freeze protection: Yes (TDA)
• Approved to depth (m/f): 50/165
• Automatic Inhalation Control: Yes
• Automatic Venturi Assist: Yes
• CE Cold water approved +4C: Yes
• EN250:2014 approved: Yes
• EN738-1 Oxygen approved: No
• LP (bar/psi): 11,5/167
• Nitrox EAN 40%: Yes
• NORSOK Tested: No
• O-rings: EPDM
• Oxygen 99,95 %: No
• Trimix: Yes
• US Navy Tested: No
• Working pressure: 300 bar

XSTREAM BLACK COMPLETE KIT (PSI)

• Xstream Black first stage
• Xstream Black second stage
• Xstream Black octopus
• 1 x LP-Hose 70 cm / 27.5"
• 1 x LP-Hose 90 cm / 35,5"
• Poseidon Cirrus pressure gauge (PSI)

PRODUCT INFORMATION
The benchmark for high performance regulators. Whether you dive with air, trimix or oxygen, the Xstream range outperforms all other regulators. First regulator certified to 200 m / 656 ft. The preferred choice for the US Navy, Coast Guard, NYPD among others.

With the Xstream Black we have turned the best functioning regulator on the market into the best looking one as well.

KEY PERFORMANCE FEATURES:  

• Side purge prevents current-induced free flow
• Side vent diverts bubbles from face
• EAN 40 ready and compatible
• Works perfectly either way up, or from left or right side
• Only regulator certified for 200 m / 656 ft
• No environmental sealing required for cold water
• Weight (g): 1885.00

Envoy RaZor Regulator

A unique combination of a valve and a 1st stage in a very light package. Great for use on Pony Bottles for Public Safety Diving.

A combination 1st stage and tank valve perfect for pony bottles. The Envoy RaZor regulator has a Flow-by Piston style 1st stage with design features that allow direct airflow through the 1st stage, providing performance that far exceeds what would be expected in an economical regulator. The 2nd stage is a balanced orifice design.

The Flow-by Piston design of the RaZor 1st stage provides much greater reliability and serviceabilty compared to conventional designs, while improving responsiveness and performance at all breathing rates. This 1st Stage sits direct atop a Tank Valve section the threads into any standard 3/4-14 NPSM Scuba Cylinder. This combination saves space and increases efficiency making it ideal where weight and space are critical such as stage bottles and fully redundant systems.

The RaZor comes with a filling adapter that allows the RaZor to fill its tank using a standard Yoke Filling Whip.

You can also purchase a Yoke Transfiller that will allow you to fill the RaZor 1st stage off of another SCUBA cylinder. Look below to view an instructional video on how this is done.

Work of breathing at heavy demand*: 1.34 Joule/Liter
*198 (60M) depth 750 psi inlet, 62.5 RMV (liters per minute respiratory volume)

Like all Zeagle regulators, The Envoy RaZor comes factory ready for use with EAN/ NITROX to 40% O2.

RaZor FIRST STAGE/VALVE FEATURES:

• High Performance Porting
• Flow-by Piston
• Yoke Style Filling Adapter Included
• 4 Low Pressure Ports (3/8”-24 UNF)
• 1 High Pressure Port (7/16”-20 UNF)
• Weight 1.62 lb. (.73 kg.)
• Intermediate Pressure: 125-150 psi (8.6-10 bar)

ENVOY SECOND STAGE FEATURES:

• Downstream valve
• Balanced Diaphragm
• Dive/Pre Dive Venturi Control
• Weight: .42 lb. (.26 kg) ( w/o hose)
• Hose Length: 44 in. (1.1 m)

Interspiro AGA FFM  Omniswivel Version 2.0

Omni products are well known to the high tech divers and rescue workers that need total stability such as:

• Rebreather / Technical Divers
• Search, Rescue and Recovery Agencies
• Police Departments and Fire Departments
• Military
• NASA

Standard OmniSwivel for use with 2nd stage SCUBA regulators.

Description: 

• OmniSwivel for 2nd Stage Regulator
• 3 way 360deg rotation
• 9/16"-18 Male to 9/16"-18 Female Insert
• Version 2.0 with a set screw that captures the spindle-screw and prevents it from ever being able to back out.
• PN: SW-S-2.0

Details:

• Solid brass construction for maximum durability.
• Oxygen Compatible Materials and O-Rings.
  
• Viton 75 Orings with Tribolube 71 lubricant
• 
  

Omni products are well known to the high tech divers and rescue workers that need total stability such as:

• Rebreather / Technical Divers
• Search, Rescue and Recovery Agencies
• Police Departments and Fire Departments
• Military
• NASA

Hollis Regulator Necklace

Popular among technical divers. The Hollis Regulator Necklace is made of a durable solid silicone construction. Simply slip it over your regulator mouthpiece ant it holds your regulator comfortably in place around your neck. It is easy to install on any second stage regulator and never reach around for your regulator again!

Diameter: 9"

Highland Silicone Regulator Necklace

At U.S. Water Rescue / MT Dive Tech we stress the importance of not only having a truly redundant air source, but making sure your alternate regulator is easily accessible with minimal effort, especially when diving in cold black water; the Regulator Necklace is a perfect solution for keeping your second stage right where you need it.

P/N HL601

AD-11  Scuba Adapter ScubaPro Male BC to Standard Female BC

AD-04 Scuba Adapter 1/2"-18 UNF-2A to 3/8"-24 UNF-2B

Brass 2nd Stage Regulator Quick Disconnect - XS Scuba

• Add a quick-disconnect to most any regulator or full face mask
  

• Installs between low pressure regulator hose and second stage

• Lock-down screw to prevent accidental disconnection
  

• Chromed brass construction

• Low pressure use only - below 200 psi

• Factory cleaned - Viton o-ring

• Part # AC990

Deluxe Spin-On Yoke - 316 SS

This adapter allows you to use your DIN style 1st stage regulator on a yoke style tank valve. Simply spin the adapter onto your 1st stage and your ready to attach it to the scuba tank. The stainless steel model tends to hold up better than brass in salt water and heavy use.

Atomic Aquatics B2 Scuba Regulator
*Government and PSD Teams call for public safety pricing.

Why Brass & Titanium?
Even though the use of multi-layer chrome plated Brass for the body of the first stage is a more conventional material choice... the performance of the B2 is truly superior to any other rival. Atomic designed our signature breathing performance into the B2 to give a diver the perfect combination of comfort, style and value. The main design difference? The total weight of the B2 is only 9 ounces more than the T2.

The Most Awarded Atomic Regulator
Virtually identical performance as the T2 with a Brass First Stage
The B2 gives divers a close alternative to the all-Titanium T2. The signature Atomic breathing performance is nearly identical. The B2 is ergonomically designed to be the world’s most comfortable second stage just like the T2. The key difference is the chrome-plated Brass body of the B2 first stage, which is more economical without sacrificing performance. That’s why the B2 has garnered more awards from independent tests and reviews than any other regulator on the market.

First Stage:

• First stage materials are chrome-plated Brass and 316 Stainless Steel
• Atomic Jet Seat high-flow piston first stage
• Optional factory-sealed first stage to prevent outside contamination such as silt and sand and prevent freezing
• Nitrox ready for mixtures up to 40%
• First stage ports: 2 HP fixed / 5 LP on swivel cap

Second Stage:

• All-Titanium second stage construction same as Atomic T2
• Patented Atomic Seat Saving Orifice
• Patented Atomic Automatic Flow Control (AFC)
• Rapid adjustment knob for manual second stage de-tuning in special situations
• Polished 316 Stainless Steel Atomic Comfort Swivel
• A new high-flow second stage case that significantly lowers breathing effort at any depth from shallow water to beyond the limits
• Dual material second stage cover enables entire front to be used for purge
• Dual silicone comfort fit mouthpiece with tear-resistant bite tabs
• 2 year/300 dive service interval
• Limited Lifetime Warranty – not contingent on proof of service
• Optional color kits available:

90 Degree Elbow for FFM

90 Degree Elbow. Allows diver to re-route Low Pressure regulator hose for better trim & comfort. Fits Guardian Full Face Mask (FFM) & all standard 2nd stage regulators.

• Male: 9/16 - 18 UNF - 2B Regulator or Other Adapter
• Female: 9/16 - 18 UNF -2A LP Hose or Other Adapter
• No International Orders

Poseidon Xstream Limited Edition Package

HIGH PERFORMANCE REGULATORS
Versatile, robust and safe. Poseidon regulators deliver the experience that all divers seek. Unrelenting performance and safety in any environment. Expect excellence.

The ultimate regulator celebrates 20 years of unparalleled performance and breathing comfort in frigid waters down to 200 meters still no one can match!

To celebrate this we are offering an Xstream Limited Edition Package containing an engraved Xstream Limited Edition Kit with a matching ThreeDee Mask together with a Regulator bag, Poseidon Fish Cap, and Keychain.

KEY PERFORMANCE FEATURES

• Side purge prevents current-induced free flow
• Side vent diverts bubbles from face
• EAN 40 ready and compatible
• Works perfectly either way up, or from left or right side
• Only regulator certified for 200 m / 656 ft
• No environmental sealing required for cold water