Interspiro AGA Nose Push Pad 3- Slot (Pre-cut)

• Original Pressure Equalizing Pad (Old Style) for the Inter)spiro AGA Full Face Mask.
• Easy replacement part for worn out or lost push pads.
• 3 - Slot
• Made in the EU.

Light & Motion D-Ring Kit (Goodman Handle Adapter Kit) used along with the Guardian Full Face Mask Accessory Rail Light System.

Model#: 920027-000
The Light & Motion D-Ring Kit must be used to mount your SOLA Light onto a Rail System.

GOODMAN HANDLE ADAPTER KIT INCLUDES:

• Sola 2 L mount Base
• GoBe Sola Adapter
• 1/4-20 x 3/8" Flat Head Screw
• 1/4-20 x 3/8" Button Head Screw
• 10-32 x 3/16" Screw
• M5 x 12mm Screw
• Allen L Key 5/32"
• Allen L Key 3mm

Instructions included for mounting a Goodman handle to Sola light. 

Above Picture shows directions for using the metal piece from the D-ring kit to mount the Sola Light to an Accessory Rail.

Replacement Slide To Mount SOLA Light

Model#: 920029-000
This slide allows you to mount a Light & Motion SOLA Light onto your Rail System.

Replacement Slide To Mount SOLA Light quantity

Interspiro Extended Equalizing Push Pad

Have trouble equalizing your AGA mask? That's no surprise. Interspiro has just come out with a new equalizing pad that is taller and wider. For use with Interspiro AGA or OTS Guardian Full Face Masks.

GFFM Accessory Rail (Alone)

GFFM Accessory Rail. (Includes Rail w/ wire mount & 2 nuts).

**Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included** No mask included.

GFFM Accessory Rail System w/ Slide to Mount SOLA Light

GFFM Accessory Rail Light System w/ Inodive LED Light

Model#: 920012-000

GFFM Accessory Rail Light System. Includes Rail, Slide, and Inodive LED Light
Dive With Your Hands FREE!

The accessory rail system easily attaches to the Guardian full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask.

The INODIVE Light is a compact LED dive light. The light output is considerably brighter then what you would expect from a light its size. The type of light that this light produces is particularly suited for turbid water/low visibility diving.

This light is rated at 10 to 300 Lumens, and will burn for approx. 1 hour (full power) on 3 AAA batteries. A double O-ring seal, and magnetic switch, help insure the watertight integrity of the light to 100 meters.

Other devices can be attached to the accessory rail by adding additional “Universal Slides” (purchased separately). Cameras, lights, and other devices are then changed by simply sliding them on or off the rail. This quick-disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. Each Accessory Rail can accept 2 slides. Additional slides can be purchased separately. One rail may be used, or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valves.

Attaching the rail system to the Guardian mask makes it possible for a diver to have both hands free to accomplish difficult tasks underwater.

No tools are used to attach the rail system to the mask. Two thumb screws are simply tightened by hand to secure the rail system to the mask. No modifications are needed, and the rail is easily removed for mask maintenance.

Once devices are mounted to the removable “Slides” they can be slid onto any other dive mask, or dive hat, that has an Accessory Rail mounted.

The rail system is not mass produced—each one is made and assembled individually, and manufactured using quality materials.

**Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

90 Degree Elbow for FFM

90 Degree Elbow. Allows diver to re-route Low Pressure regulator hose for better trim & comfort. Fits Guardian Full Face Mask (FFM) & all standard 2nd stage regulators.

• Male: 9/16 - 18 UNF - 2B Regulator or Other Adapter
• Female: 9/16 - 18 UNF -2A LP Hose or Other Adapter
• No International Orders

GFFM Accessory Rail Light System w/ SOLA 800 

HSA-2 Low Pressure Hose For AGA Mask

• Supply hose designed for the AGA Interspiro FFM (Full Face Mask)
• Low Pressure
• Length: 32"
• Part #: 604001-034

BS-1 Battery Snap

Model#: 914016-000
Battery Snap used in SSB-2010, SSB-2001B-2, and SSB-1001B.

The ABV-1 Ambient Breathing Valve (910271-000) allows the user to breath ambient air on the surface. This helps conserve air while you wait for your dive buddy or while on the surface.

The valve is easy to use, simply turn the valve counterclockwise one turn. Outside air will pass through the one way valve. It clears the lens then enters the (2) one way valves into the oral nasal cavity. You exhale through the 2nd stage regulator. When ready to dive, close the valve and you are on the way.

• The ABV *-1 Ambient Breathing Valve allows the user to breathe ambient air at the surface, conserving your tank air. It is simple to use and its low profile keeps it out of the way.
• To use the device, while on the surface simply rotate the valve counterclockwise. The one way valve will open and allow air into the FFM
• The one way valve located on the inside of the FFM ensures that your exhaled air does not go back out the valve. Your exhaled air is sent out through the second stage regulator ensuring you do not get a Co2 "building" in the FFM.(build-up)
• The valve also is forced closed when diving. The over pressure in the FFM assures that. If you forget to close the valve before diving, the valve disc will help keep water out.
• When the valve is closed, it has a low profile.
• When the valve is closed, it has a low profile.
• The ABV*-1 is a must for all Search & Rescue Teams, Military Divers and Divers who spend a lot of the time in the water!
• Order one today - with FFM purchase: ABV*-1 (910271-001) or separately with the visor ABV-2 (910271-002) or send us your visor and we can install one (installation fee $25.00 + ABV*-1 valve)(Note: It is recommended that a Certified Interspiro Service Technician install the visor).

Spare Part Kit, for all OTS SSB's.

• 3 small o-rings
• 3 large o-rings
• 1 battery snap
• 1 SP-8 Battery Holder

O-ring Kit used for Ocean Technology Systems SSB Communications Units. Keep your SSBs working well with new o-rings.

• 6 small o-rings
• 4 large o-rings

Interspiro Weight Kit

For filming they are great! They not only balance the full face mask but help keep out unwanted light from the sides. This is typically a problem when looking into a video camcorders view finder.

Does the ffm need to be balanced. This depends on the user. Most users are not in the water long enough to notice a difference. However, professional divers who spend hours underwater will notice a slight rise in the ffm. This after hours becomes uncomfortable. The weights solve the problem.