The SEASOFT PRO / M6™ 6 mm Drysuit Hood is designed to be worn with a full face mask. It has a skin-in seal facing the diver's face AND a skin seal facing out toward the mask with a layer of tough nylon fabric sandwiched in between the two.

The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

SEASOFT uses 4 different types of neoprene to make these hoods.

The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the best commercial diving hood available anywhere.

Why should you buy this SEASOFT PRO / M6™ 6 mm Drysuit Hood?

The SEASOFT PRO / M6™ 6 mm Drysuit Hood is our commercial drysuit hood designed to be worn with a full face mask. The PRO / M6™ has a layer of skin on the inside and on the outside with a layer of tough nylon in between these two layers. The skin allows the hood to seal to your face and the full face mask to seal to the hood.

Of course, the three back panels are of compressed neoprene to provide you with thermal protection as you descend. You don't want your hood getting thinner as the water is getting colder.

There are no seams down the middle of the chin, this prevents jaw fatique.

There are two layers of Titanium Flake Foil™ for added heat retention.
At the top of the hood there are two small holes with a built in baffle system inside the hood to purge excess air from inside your hood while preventing any cold water from entering.
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the perfect commercial hood for that specific dive.

Click Here for Full Face Masks

SEASOFT Ti PRO 6 mm Drysuit Hood with Zipper

The SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper is the most comfortable and warmest drysuit hood available, Here's why:

• The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!
• Rugged #10 size zipper for those that desire this feature.
• There are no seams in the middle of the seam to cause jaw fatique.
• SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.
• There are two tiny holes in the top of the hood with a baffle system to allow air to purge.
• There is "skin in" on the neck to bind to your drysuit seal.
• High quality neoprene is used throughout on every hood.

Why should you buy this SEASOFT Ti PRO™ 6 mm Drysuit Hood with a Zipper?

The short answer is that this hood is more comfortable and warmer than any other hood made by any other company but here's why it is. And we added a #10 size zipper for the extra convenience for those who desire that feature.

FACT: The head is responsible for the greatest heat loss while diving, up to 35%.

FACT: Other hoods use neoprene that contains lots of air bubbles, the claim being they are comfortable. However, lots of bubbles create a hood that easily compresses while diving – good-bye thermal protection! The neoprene is getting thinner just when you need it the most!

FACT: Many divers get cold thinking it’s their wetsuit or drysuit making them cold when it’s the lack of a warm hood.

SOLUTION: SEASOFT uses compressed neoprene in the three back panels for unsurpassed warmth. SEASOFT Hoods do NOT get thinner at depth; they keep you warm and toasty throughout your dive.
FACT: Most companies cookie cut their hoods, the left side could be the right side, there is a seam right down the middle of the chin which caused jaw fatigue.

SOLUTION: All SEASOFT Hoods are designed and manufactured without seams in the middle of the chin. Other companies build hoods with this seam because it is less expensive to manufacture them this way.

FACT: Most companies use one type of neoprene and occasionally two to make their hoods, this keeps costs low.

SOLUTION: SEASOFT never uses less than 4 types of neoprene to make its hoods because each part of the hood is performing a different function. You deserve to be warm AND comfortable!
ALL SEASOFT Hoods have two layers of Titanium Flake Foil Technology™ for extra warmth.

So there are the facts, SEASOFT has invested in the engineering to bring you the Ti PRO™ 6 mm Drysuit Hood w/ zipper that is unsurpassed in performance, all you have to do is get one for yourself.

BARE SealTeck Coldwater Drysuit Hood

Our highest performance hood that set the standard for comfort and sealing.

• All exterior seams are sealed with BARE’s SEAMTEK liquid seam tape and incorporate our SEALTEK ring seal system designed to work together to reduce or eliminate water penetration and improve diver comfort and warmth
• 7MM ELASTEK full-stretch neoprene for ultimate stretch and comfort
• 5MM ELASTEK/GLIDESKIN-IN trimmable face and neck seal glides nicely over your hair
• SEAMTEK exterior seam protection reduces water penetration at the seams keeping your head warm and dry
• Incorporates BARE’s SEALTEK ring seal system for maximum water sealant performance when used with a drysuit
• Vented to allow trapped air to escape
• Hood neck seal mates with wetsuit seal/collar
• Mask strap grip pad on the back of the hood secures your mask strap in place
• Double glued and blind stitched with SECURE-LOCK construction improves isolation and reduces flushing keeping you warmer and diving longer

7mm SEALTEK COLDWATER DIVE HOOD

BARE 7mm Sealteck Coldwater Hood is the finest high performance divers hood we’ve ever made. Recreational and professional scuba divers will appreciate its outstanding comfort and ease of donning and doffing.

BARE 7MM ULTRAWARMTH DRYSUIT HOOD

An ultrawarmth hood for coldwater diving conditions that uses Celliant® Infrared Technology to conserve lost body heat and accelerate thermal recovery.

• ELASTEK outer fabric and Highloft Celliant inner fabric
• ELASTEK/GLIDESKIN-IN trimmable face and neck glides nicely over your hair
• Hood neck seal mates with drysuit seal/wetsuit collar
• BARE’s GEN2 hood vent allows trapped air to escape without letting water enter
• Mask strap grip pad on the back of the hood secures your mask strap in place
• Double glued and blindstitched with SECURELOCK construction improves isolation and reduces flushing keeping you warmer and diving longer
• 9MM neoprene with full stretch ELASTEK material for ultimate stretch and comfort
• 5MM ELASTEK/GLIDESKIN trimmable face andneck seal
• Vented to allow trapped air to escape
• Hood neck seal mates with drysuit seal/collar
• Easy on, easy off construction
• Sizes: XS, S, M,L,XL, 2XL

Sharkskin Chillproof Hood

More than 25% of body heat is lost through the head and extremities of the body. The hood design provides the best insulation and protection for cold dives and activities. It can even be worn under a conventional neoprene hood for extra warmth, and is flexible enough to slide off if required and still be comfortable.

• The comfortable 'hollow yarn' fleece layer is next to the skin and 'wicks' moisture and sweat away from the body to help keep you dry.
• The second middle 'technical' layer is 100% windproof yet breathes to regulate body temperature while stopping windchill.
• The third outer layer is a nylon/lycra blend for abrasion resistance and 4 way stretch.
• It is also UV resistant for sun protection and has a durable water repellent finish (DWR) to provide a protective shell that 'sheds' water.

SHARKSKIN™ HOOD SIZING

• Center panels are made from double-layered 3mm titanium neoprene with molded vent valves to release trapped air from within the hood.
• Seams are glued, blind-stitched, and seam sealed.
• Grip Strips located at hood side prevent mask strap from slipping.
• Ergonomically designed collar conforms to your neck for maximum coverage and mobility.

• Center panels are made from double-layered 3mm titanium neoprene with molded vent valves to release trapped air from within the hood.
• Seams are glued, blind-stitched, and seam sealed.
• Grip Strips located at hood side prevent mask strap from slipping.
• Ergonomically designed collar conforms to your neck for maximum coverage and mobility.

• Simple yet effective in keeping your head warm.
• Designed to be worn over the ears.
• Stretchy 1mm Titanium neoprene material keeps your noggin warm and comfy.
• Seams are sewn with flat-stitch for strength, flexibility and comfort.
• Available in Black only.

• 5/3mm all 250% maxflex stretch dive hood.
• New cut makes it more attractive.
• Two top purges reduce water inside the hood.

Description

BARE Coldwater Wetsuit Hood

5MM SEALTEK WET SUIT HOOD