Finally, a cost effective, durable, easy to use, stable, pony bracket system that works! Highland SS Pony Mount is engineered to carry a small pony cylinder along side of your primary dive cylinder. Aluminum 8, 13, & 19 cu ft pony cylinders.

• Quick detach
• Stainless steel cam buckle
• Rubber feet to protect paint
• Adjustable length nylon webbing
• 316 grade stainless steel construction
• Includes buckle pad to prevent tank scratching
• Designed for 6.9" to 8.0"diameter primary cylinder
• Designed for 4.4" diameter pony cylinders - Aluminum 8, 13, & 19 cu ft
  
  
  Click here to download brochure

Metalsub Cylnder Bracket

With the Metalsub cylinder Quick Release System, cylinders can quickly be attached and detached. One half of the system is permanently attached to the CCR can, the other half is attached to the cylinder. For Public Safety Divers the Pony Bottle Bracket provides a solid and durable system that can quickly be released underwater with ease. Both halves can be attached using two stainless steel clamps or a tank band. Sold individually, each full kit is enough to mount one cylinder.

By pressing with the thumb of a spring loaded pin, the bottles are released. The plates are equipped with rubber strips for a better grip on the CCR can and cylinders. The metal is coated with a seawater-resistant coating.

The “short” version was originally designed to be used with our mini/ travel CCR canister and was necessary to allow the cylinders to sit slightly higher to avoid the valves from contacting before the bottom of the can. They are also a light weight version (about 20% lighter than the standard size).

Now featuring the “opposite” orientation so that both release buttons will be easily accessible from the rear of the rebreather!

	Approx Height	Approx Width	Approx Weight
STD Female	255 mm 10.0625 inches	70 mm 2.75 inches	290 g 10.4 oz
STD Male	200 mm 7.875 inches	70 mm 2.75 inches	265 g 9.4 oz
Short Female	215 mm 8.46 inches	70 mm 2.75 inches	245 g 8.6 oz
Short Male	160 mm 6.3 inches	70 mm 2.75 inches	200 g 7.2 oz

 

QUICK-TEC PONY BRACKET MOUNT

Includes two small aluminum mounting blocks that slide together and lock into position. The Quick-Tec I includes nylon cam band, the Quick-Tec II includes a pair of stainless steel hose clamps
for a more permanent mounting.

• Fits 13, 19 or a 30cu foot pony bottle.
• Made with machine blocks of aluminum.
• The aluminum mounting blocks slide together and lock in position.
• Each Quick-Tec system includes 2 small aluminum mounting blocks that slide together and lock into position. A simple press of the lever allows the mounting blocks to release and slide apart.
• Does not include band for main tank, typically diver will use BCD tank band for the mounting on the primary cylinder.

Choose either the Quick-Tec I or the Quick-Tec II:

• Quick-Tec I system includes a nylon Cam Band for the pony / stage cylinder.
• Quick-Tec II system includes a pair of stainless steel hose clamps for more permanent mounting of the pony / stage cylinder.

Heavy Duty Quick Draw Pony Bracket 13/19

• New, heavy duty receiver bracket with our famous 13/19 cubic foot bottle ring.
• New bracket is one full inch taller and will grip your tank even firmer than the standard bracket does.
• Stainless steel Quick release pins with lanyard.
• All extruded marine aluminum and stainless steel.
• Ring has staging feature like the new 30/40 rings.

Features

• Contains Heavy Duty reciever bracket with bottle ring for 13/19' aluminum pony bottle and Stainless steel Quick release pins with lanyard.
• Originally developed for the 30/40 size bottles this bracket will hold all our rings and is stable with just about any bottle.
• Works great with larger diameter tanks.
• Even bigger bottles are stable with this bracket.
• An optional rubber insert can be glued to the receiver bracket with a glue like Pro Bond tm.

Ring for 13-19 Quick Draw Pony Bracket

A solid extruded and machined aluminum ring for the 13 and 19 cubic foot pony and staging bottles. Machined to our exacting standards then microfinished and plated.

New ring has a round slot machined into the receiver part of the ring that will accomodate up to 1/2" Nylon line for staging. The bottle can then be hung from the BCD web rings as a staging bottle when not attached to the tank. Meets the new one cut rule for penetration dives. A great safety feature.

Comes with stainless steel fasteners.

Fits both our new Heavy duty reciever bracket and standard bracket.

Mounts securely to your tank via your BCD tank strap or an additional tank band. Typically a BCD strap will work just fine, unless the strap does not line up where you want to mount your pony bottle. The pony bottle should be mounted in a way that it is streamlined and does not effect your trim while diving.

U.S. Water Rescue Dive Team uses the Quick Draw Pony Brackets as their primary mounting systems when using SCUBA. They mount one receiver bracket on each BC, then have multiple pony bottles set up ready to go with the Pony Bracket Ring. This system allow quick switching of bottles without having to take time to switch brackets. USWRDT chooses to use the Quick Draw System because it is a solid mount, some pony systems slide all over the place and move all about. The Quick Draw System also allows easy detachment underwater where as a Backup Diver could give the pony bottle to a diver in need and leave if he needed to retrieve more equipment or air (for whatever reason or emergency). Many systems on the market are hard to release underwater with thick gloves, no visibility, and cold numb hands.

Finally, a cost effective, durable, easy to use, stable, pony bracket system that works! Highland SS Pony Mount is engineered to carry a small pony cylinder along side of your primary dive cylinder. For Aluminum 6 cu ft pony cylinders.

• Quick detach
• Stainless steel cam buckle
• Rubber feet to protect paint
• Adjustable length nylon webbing
• 316 grade stainless steel construction
• Includes buckle pad to prevent tank scratching
• Designed for 6.9" to 8.0"diameter primary cylinder
• Designed for 3.2" diameter pony cylinders - Aluminum 6 cu ft
  
  
  Click here to download brochure

Pony Bottle Bag

• Connects to primary diving cylinder
• Utilizes BC tank straps
• Bottom strap adds stability to bag
• Self-draining mesh bottom
• Dual Velcro straps keep the pony bottle secure
• Designed to fit both Catalina and Luxfer cylinders

Ideal for use with dry suit inflation system or secondary / backup scuba air.