PASS-THRU VINYL COATED WEIGHTS

• Traditional, Bullet Style Design (2 lb)
• Black Long Lasting Vinyl Coating 2 and 4 lb
• 3 lb available in Yellow Vinyl Coating only
• Less Weight Belt Webbing Length is Needed
• Quicker and easier (than lace through weights) to add and remove weights from belt.
• Use on Weight Belts or weight pouches for Public Safety Divers, Technical Divers Commercial Divers, and Recreational Divers! 

Aqua Lung / SeaQuest Style QD Adapter

• Convert any standard SCUBA LP regulator hose to an “Aqualung / SeaQuest Style” Quick Disconnect hose
• Installs to the second stage end of a regulator hose 
• Chromed brass construction with Viton o-rings
• Low pressure use only - below 200 psi 
• Compatible with: Aqualung / SeaQuest Air Source, Oceanic Air XS 2, US Divers Air Mic, Mares Air Control

Orange Lace Through Vinyl Coated Weights

• Orange-Rental-Lace-Thru-Weight
• Orange Lace-Thru great for RENTAL
• Bright orange color for easy identification
• Vinyl is tough and long lasting
• Protects boat decks and swimming pools from getting marred
• Prevents lead from touching your hands
• Great for use with nylon or rubber weight belts
• Ideal for use in weight-integrated BCs
• Built-In-USA

Low Pressure Inflator hose for BCD or Drysuit

• Easy See & Grip Wide Collar
• Easier Attachment
• Easier Removal
• Flattened Side to Prevent Clearance Issues
• Standard Shrader Valve Style
• Standard Collar Attachment
• High Quality Rubber

• WP: 400 psi
• BP: 2000 psi
• 3/8 - 24 UNF Male to Standard BC
  Quick-Disconnect Female

Stainless Steel 2nd Stage Regulator Hose Quick Disconnect

• Add a quick-disconnect to most any regulator or full face mask
  
• Installs between low pressure regulator hose and second stage
  
• Click & Lock to prevent accidental disconnection
  
• Stainless Steel construction
  
• Low pressure use only - below 200 psi
  
• Factory cleaned - Viton o-ring
  
• P/N AC992

Poseidon Hose Adapter

• Convert any standard regulator hose to fit the first generation Poseidon X-Stream second stage
  
• Fits any Poseidon second stage with M31-1.5mm inlet threads
  
• Brass construction with black chrome finish
  
• Does not have a built-in relief valve
  
• Low pressure use only - below 200 psi
  
• P/N AC980 - XS Scuba

Voyager 5 Regulator Bag

Rebuildable & Adjustable OPV - Over Pressure Valve

• Easy to adjust from 150 to 250 psi

• Factory preset at 200 psi (+/- 10 psi)

• All stainless steel construction with Viton o-rings

• Machined Delrin cap protects the adjustment point

• Compact relief valve releases pressure in the event of an over pressurization of the first stage 

• Fits standard 3/8”-24 UNF medium pressure regulator port 

• Regulator not included (for illustration only)

Pocket Weight Belt

• 4 pocket: S/M - Length: 60" - Max Weight 20 lbs
• 6 pocket: M/L - Length: 60" - Max Weight 30 lbs
• 8 pocket L/XL - Length: 72" - Max Weight 40 lbs

XS Scuba Mask Bag

XS SCUBA Folding BC Hanger

• Unique folding design is ideal for travel
• Large hooks to retain the shoulder of the BC
• Designed for quick drainage and drying
• Swivel attachment hook
• Tough X-beam construction
• Weight: 11.5 oz (326 g)
• Colors: Yellow, Blue, Black

Front Side
• Submersible pressure gauge
- Highly accurate, Bourdon tube design
- Reads to 5000 psi
- Built-in thermometer
- Luminescent gauge face
• Depth gauge
- Air-filled, steel-diaphragm construction
- Reads to 200 feet
- Maximum depth indicator needle
- Luminescent gauge face

Reverse Side
• Small slate
- Removable to install compass module

Weight Bag

Brass 2nd Stage Quick Disconnect w/ Brass Swivel

Using the same brass coupler as the AC990, this product provides the additional benefit of adding a brass swivel to the male portion.

• Installs between LP hose and 2nd stage, or full face mask
• The rotating swivel action reduces torque on the 2nd stage, leading to increased comfort
• Low pressure use only – below 200 psi
• Brass 2nd Stage QD w/ Swivel Male Only
• Install on multiple 2nd stage regulators or full face masks

Brass 2nd Stage Regulator Quick Disconnect - XS Scuba

• Add a quick-disconnect to most any regulator or full face mask
  

• Installs between low pressure regulator hose and second stage

• Lock-down screw to prevent accidental disconnection
  

• Chromed brass construction

• Low pressure use only - below 200 psi

• Factory cleaned - Viton o-ring

• Part # AC990

High Pressure Port Swivel Adapter

Use this HP Port Swivel Adapter to route your HP hose 90º. Reroute, or increase, the number of high pressure hoses coming off your first stage regulator.

• Chromed brass construction with Viton o-rings
• High pressure only – maximum 5000 psi
• Cleaned for use with up to 40% pre-blended Nitrox
• (1) 7/16”-20 Male Inlet to
• (1) 7/16”-20 Female Outlet

XS Scuba
Male Paintball to 1/4" Male NPT

P/N AC393

Swivel LP Two Port Adapter for 1st Stage Regulator - XS SCUBA

• Reroute, or increase, the number of low pressure hoses coming off your first stage
• Chromed brass construction with Viton O-rings
• Low pressure only – below 200 psi
• (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
• p/n: AC902

Pony Regulator System

Brawn Regulator

SCUBA Hose To Hose Connector

• Connect two regulator hoses together to make one longer hose
• 3/8”-24 female x 9/16”-18 male
• Low profile 11.5mm height
• Brass construction with black chrome finish
• Low pressure use only - below 200 psi
• AC960

“Drysuit Style” QD Adapter

• Convert any standard regulator hose to a “Drysuit Style” Quick Disconnect Low Pressure SCUBA hose
•  Installs to the second stage end of a regulator hose
• Chromed brass construction with Viton o-rings
• Low pressure use only - below 200 psi
• Compatible with: Swedish CEJN couplers as found on many drysuit inflation valves, Zeagle Octo Plus and Beauchat Venturi

Argon Regulator for Drysuits

Stay a little warmer while drysuit diving this season with the use of Argon for drysuit inflation. Regulator can be used for AIR or ARGON.

• Compact, low profile first stage
• Specifically designed for drysuit inflation
• Flow-by piston design
• One HP and two MP ports pressure ports
• Factory set I.P. at 115 to 125 psi at 3000 psi
• Direct attachment to 200 or 300 bar DIN connection
• Includes 22” Miflex QD hose in orange color
• Includes Over Pressure Valve (p/n AC395)
• Includes Delrin DIN cap w/ lanyard (p/n HL401)
• Includes Mini Tech Gauge (p/n HL502) with rubber boot
• Optional Spin-On Yoke (p/n AC370) for yoke attachment
• Now includes orange hose
• p/n HL405

• Easy use with open webbing channel
• molded glass filled nylon
• 316 grade stainless steel hinge pin
• Secure webbing grip with high lift lever
• Designed for use with .09 to .1" webbing

• O-ring - BunaN (Outlet)
• O-ring - BunaN (3/4" NPSM Inlet)
• Seat
• O-ring - EPDM (Stem)
• Teflon Washer (Stem)
• O-ring EPDM (Bonnet)

Thermo PRO Scuba Tank Valve

• Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
• 3/4”-14 NPSM standard inlet threads
• Clean for pre-blended Nitrox up to 40% oxygen
• Large easy grip rubber handwheel
• Includes Dip Tube (hex)
• 2 year manufacturer warranty

• Available in four service pressures
  • 2400 psi (p/n VA200-24N)
  • 3000 psi (p/n VA200-30N)
  • 3300 psi (p/n VA200-33N)
  • 3442 psi (p/n VA200-34N)