7" No Bump Cable Ties (5 Pack)
TL114Regular price $2.00 Save $-2.00
Poseidon Cyklon HP Port Adapter
2910Regular price $24.00 Save $-24.00
On older Poseidon Cyklon 1st stage SCUBA regulators, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.
If you have an older style 1st stage, this adapter can be used to attach a standard High Pressure Hose.
AGA FFM CONVERSION KIT, POS TO NON POS
900256-004Regular price $90.00 Save $-90.00
Convert your Interspiro AGA Full Face Mask from Positive Pressure to Non-Positive Pressure. A common mis-conception is that Public Safety Divers want to go with the positive pressure FFM. They do this to keep contaminated water out of the mask and off the diver's face, but in reality the positive pressure FFM just complicates things by spraying water in the divers face when the mask is being put on or taken off (on the surface). If the positive pressure AGA is inverted it will let water in. In reality all FFMs have positive pressure, however the Pos Press AGA (originally designed for firemen) has a greater positive pressure than other full face masks or the AGA non-positive pressure version.
* Conversions should be done by Authorized AGA Service Technicians only.
SEASOFT PRO / M6 6mm Drysuit Hood for wearing with a full face mask
002-065Regular price $119.99 Save $-119.99
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is designed to be worn with a full face mask. It has a skin-in seal facing the diver's face AND a skin seal facing out toward the mask with a layer of tough nylon fabric sandwiched in between the two.
The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.
SEASOFT uses 4 different types of neoprene to make these hoods.
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the best commercial diving hood available anywhere.
Why should you buy this SEASOFT PRO / M6™ 6 mm Drysuit Hood?
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is our commercial drysuit hood designed to be worn with a full face mask. The PRO / M6™ has a layer of skin on the inside and on the outside with a layer of tough nylon in between these two layers. The skin allows the hood to seal to your face and the full face mask to seal to the hood.
Of course, the three back panels are of compressed neoprene to provide you with thermal protection as you descend. You don't want your hood getting thinner as the water is getting colder.
There are no seams down the middle of the chin, this prevents jaw fatique.
There are two layers of Titanium Flake Foil™ for added heat retention.
At the top of the hood there are two small holes with a built in baffle system inside the hood to purge excess air from inside your hood while preventing any cold water from entering.
The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the perfect commercial hood for that specific dive.
Poseidon Cyklon LP Port Adapter
2415Regular price $41.00 Save $-41.00
On older Cyklon 1st stages, the standard thread size of all ports were 1/8. Today, all LP ports are 3/8 and all HP ports are 7/16 sized.
If you have an older style 1st stage, this adaptor can be used to attach a standard Low Pressure Hose.
Mcnett Sea Buff Dive Mask Cleaner
2156340831Regular price $6.00 Save $-6.00
Sea Buff Dive Mask Pre-Cleaner is specially formulated dive mask pre-cleaner and slate cleaner. Sea Buff carefully removes silicone residue left on new dive mask lenses by the manufacturing process and prepares the surface for the first application of Sea Drops or Sea Gold Anti-Fog Formulas. Failure to use a pre-cleaner on a new mask will not allow mask de-fogging solutions to properly keep a mask clear of fogging when diving.
Sea Buff also removes other residue accumulated on masks while diving or during storage. Plus, the lens cleaner in Sea Buff takes care of dirt, sunscreens, algae and other debris that can interfere with anti-fog treatments. Just apply rub, rinse and repeat. Sea Buff is also ideal for cleaning dive communication slates without harming or scratching the slate. McNett Sea Buff comes in a convenient 1-1/4 oz (37ml) squeeze applicator and is proudly made in the USA.
EZ-On 2 Super Grip Rubber Dry Gloves
GL1450101SRegular price $49.00 Save $-49.00
This is an excellent dry suit glove for Public Safety Divers! It is extremely easy and fast to put on and take off, even without the assistance of a tender. The glove is durable, but yet inexpensive enough to throw out if contaminated. It offers great dexterity for all underwater tasks, weather it's conducting a search using "feel", tying knots, or cutting fishing line. For warm water diving use with no liner, for cold water diving simply wear a thin glove/liner underneath the EZ On Rubber Drysuit Glove.
Interspiro AGA Nose Push Pad
460-190-513Regular price $59.00 Save $-59.00
Interspiro AGA Nose Push Pad 3- Slot (Pre-cut)
Light & Motion D-Ring Kit for Sola light on Guardian FFM w/ Accessory Rail
920027-000Regular price $39.00 Save $-39.00
The Light & Motion D-Ring Kit must be used to mount your SOLA Light onto a Rail System.
GOODMAN HANDLE ADAPTER KIT INCLUDES:
Instructions included for mounting a Goodman handle to Sola light.
Above Picture shows directions for using the metal piece from the D-ring kit to mount the Sola Light to an Accessory Rail.
Miflex 2 Xtreme L/P Braided Regulator Hoses
MLP06-BKRegular price $37.95 Save $-37.95
The Xtreme high performance range of diving hoses has been developed in cooperation with expert divers for a superior in depth performance. A team of Miflex 2 engineers analyzed the low point of traditional low pressure diving hoses. The fruit of their research is the Xtreme high performance range. Xtreme hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers often encounter. The patent-pending Xtreme double braiding also resists UV rays out of the water, thus extending the life span of the hoses. Unlike the traditional hoses, the Xtreme nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeves. The result? Performance and durability in extreme situations. Tie the Xtreme hose in a tight knot and the flow of air remains continuous through the hose. Now that’s versatility! The Xtreme also achieves a higher burst pressure – more than double when compared to most traditional hoses. And in the event of a physical breach, Xtreme hoses actually work to reduce the amount of air lost. How? The advance Xtreme nylon safety braiding actively shrinks under pressure, reducing the rate of air loss and buying valuable time. Xtreme hose production is carried out on automatic assembly and testing lines designed and manufactured exclusively by Miflex. Each and every Xtreme hose is subjected to more than 30 individual safety and specification checks. Any hose found not to meet the exact Miflex standard is immediately scrapped.
Inspection and Use of Miflex Xtreme LP diving hoses
Miflex Xtreme LP diving hoses are high performance hoses which are lighter and more flexible than traditional diving hoses. Just like carbon fibre has advantages over steel, carbon fibre performs differently and must be cared for and used differently than steel. Likewise, careful use and inspection is critical to the safe use of your Miflex Xtreme LP diving hose.
While in storage, or during transport of your hoses to or from storage, your hoses could become damaged in a number of ways. Never use your hose as a carrying or hanging handle for the tank. Before every dive, carefully inspect your hoses for damage, wear and tear. Pay particular attention to the area near the fittings. If your hoses show any sign of wear, no matter how slight, immediately replace the hose.
During a dive, and unknown to you, your hoses could be caught on sharp rocks, twisted or subjected to other stresses. After every dive, carefully inspect your hoses for damage, wear and tear. Pay particular attention to the area near the fittings.
Never leave your hoses dangling with any regulator installed, especially when they are without pressure. Always secure the hoses to your jacket with hooks or straps, but leave sufficient freedom for movement. These hooks or straps should be fixed directly to the regulator, or close to the hose fittings. Never secure your hose in a manner which could constantly flex or bend in the same location (i.e. create a “hinge effect”). Continuous bending at the same pivot point will shorten the life of your hose.
Never over-flex your hose. Never fold the hose back onto itself. If your hose is too long, you may loop it and secure it in place with a section of rubber tubing (such as the inner tube of a bicycle tire). However, the minimum bending radius must be at least 3.5 times the outer diameter of the hose. For example, if the outer diameter of your hose is 12mm, then the minimum bending radius (as measured to the inside of the hose) is 42 mm. Never allow the weight of your air tank to impact or rest on any part of your hose. To prevent personal injury and damage, install the low pressure hose ONLY into a low pressure outlet of the first stage regulator
Poseidon Cyklon Regulator 1/8" Port Plug
Regular price $19.00 Save $-19.00
Older Poseidon Cyklon Regulators had 1/8" low pressure and high pressure ports. A common mistake people make is trying to force a standard 3/8" or 7/16" regulator port plug with o-ring into a 1/8" Cyklon port.
Si Tech Shell Drysuit Inflation Valve
S25210Regular price $106.00 Save $-106.00
91120Regular price $7.95 Save $-7.95
Unstick zippers quickly with GEAR AID Zipper Lubricant. More than just a zipper wax, it also protects nylon, plastic, and metal zippers against salt, chlorine, rust, and corrosion – helping hardworking zippers last longer. Stuck zippers on all types of outdoor gear can be unzipped with a simple application. Use this non-toxic formula to lubricate zipper housings and heavy-duty zippers on tents, wetsuits, luggage, soft coolers, convertible soft tops, and watersports equipment. This multipurpose lubricant was previously known as Zip Tech and designed for watertight zippers, too. Making it perfect for use on wetsuits, drysuits, and dive gear. Never wonder how to fix a stuck zipper again. With a trusty Zipper Lubricant on hand, the adventure never stops.
Aqua Lung / SeaQuest Style QD Hose Adapter
AC925Regular price $30.95 Save $-30.95
Poseidon Cyklon Gaskets
1013Regular price $13.00 Save $-13.00
Don't make the common mistake of trying to use o-rings on a Poseidon Cyklon Regulator with 1/8" ports. These regulators utilized a plastic gasket/washer to form the seal on the LP and HP ports. Gasket goes in first and then your hose or plug.
Package includes 4 Gaskets.
Aquaseal FD Repair Adhesive and Cure Accelerator
11110Regular price $12.95 Save $-12.95
Need a fast fix for torn gear? Use Aquaseal FD repair adhesive and Cure Accelerator (formerly Cotol-240) to quickly tackle rips and tears in waders, wetsuits and muckboots. Aquaseal FD is a clear and waterproof urethane adhesive that comes in a 0.75 oz tube. It offers excellent abrasion resistance and can withstand constant pulling and movement. Using Aquaseal FD with the Cure Accelerator together and be back in the water within two hours. This formula also improves gear repairs by cleaning the surface and shortening tack time to 15 minutes. For a speedy solution to gear failures, use Aquaseal FD and Cure Accelerator.
Replacement Slide To Mount SOLA Light
920029-000Regular price $129.00 Save $-129.00
This slide allows you to mount a Light & Motion SOLA Light onto your Rail System.
Replacement Slide To Mount SOLA Light quantity
Si Tech Valve Attachment Tools
18223Regular price $42.00 Save $-42.00
Poseidon Xstream Regulator 2nd Stage Exhaust Cover
4538Regular price $40.00 Save $-40.00
OmniSwivel High Pressure 1st Stage Pivot Swivel
PS-HP-1Regular price $69.00 Save $-69.00
This OmniSwivel pivot swivel is used for high pressure ports (pressure gauge). It allows your pressure gauge to swivel (instead of fixed) at the 1st stage connection.
Guardian FFM Accessory Rail with Universal Slide
920013-000Regular price $314.00 Save $-314.00
Pressure Equalizing Pad (Extended) for FFM
88542-51Regular price $75.00 Save $-75.00
Have trouble equalizing your AGA mask? That's no surprise. Interspiro has just come out with a new equalizing pad that is taller and wider. For use with Interspiro AGA or OTS Guardian Full Face Masks.
Diphragm - One Way Valve/Guardian FFM
282035-000Regular price $9.00 Save $-9.00
Fox 40 Safety Whistle
WN-1814Regular price $7.50 Save $-7.50
Air Gun Blower
GN-01Regular price $20.00 Save $-20.00