Oxygen Sticker for marking scuba divers deco cylinders or rebreather bottles.

• O2 Sticker for easy identification
• Dimensions: 10"x3"

Universal Tank Valve Cap / Cover

Protect your tank valve with this easy on and off cover, that can protect your tanks valve from scratches nicks and dings as well as keeping dirt and dust out!

• Protect your cylinder’s paint and finish
• Reduce cylinder slippage
• Fits 7.25” to 8.00” diameter cylinders
• Colors: black, blue, green, pink, yellow

Not only protects from dings and scratches but can dress up your cylinder.

Protect the bottom of your scuba tanks /cylinders from dings, nicks and dents with this self draining tank boot. Boot has hexagon outer lip to prevent the cylinder from rolling when lying down.


Most commonly used for a standard aluminum 100cu' scuba cylinder.

Protect the bottom of your scuba tanks /cylinders from dings, nicks and dents with this self draining tank boot. Boot has hexagon outer lip to prevent the cylinder from rolling when lying down. Available in Black, Blue, Yellow, Green, & Pink


Most commonly used for a standard aluminum 80cu' scuba cylinder.

Protect the bottom of your scuba tanks /cylinders from dings, nicks and dents with this self draining tank boot. Vinyl boots are unbreakable, will not mark pool bottoms. Available in Blue, Black, Red, Green, & Yellow

Tank checker with bleeder valve and gauge has rubber protective cover.

• Heavy Duty
• Easy To Use Relief Valve
• For Yoke Style Valves
• Mounting Hole on Rubber Cover

Deluxe Argon Cylinder Mounting System
One System fits 6 cu ft. cylinders and 13 cu ft cylinders.
The System will fit a wide variety of main back gas cylinders ranging from 72 Cu Ft. to 104 Cu Ft.


This is one of the best systems we have ever used. You can actually cinch this system down very tight and not have to worry about loosing your tank. Non-slip pads on the main straps and the small straps. System can be used as an Argon Drysuit Inflation System or for a back-up air supply. Very durable, high quality materials. System does not include tanks.

• "Grip it", the best tank banger / noise maker available.
• Slotted unbreakable oval ball provides easy grip, good looks and extra noise.

Heavy Duty Quick Draw Pony Bracket 13/19

• New, heavy duty receiver bracket with our famous 13/19 cubic foot bottle ring.
• New bracket is one full inch taller and will grip your tank even firmer than the standard bracket does.
• Stainless steel Quick release pins with lanyard.
• All extruded marine aluminum and stainless steel.
• Ring has staging feature like the new 30/40 rings.

Features

• Contains Heavy Duty reciever bracket with bottle ring for 13/19' aluminum pony bottle and Stainless steel Quick release pins with lanyard.
• Originally developed for the 30/40 size bottles this bracket will hold all our rings and is stable with just about any bottle.
• Works great with larger diameter tanks.
• Even bigger bottles are stable with this bracket.
• An optional rubber insert can be glued to the receiver bracket with a glue like Pro Bond tm.

Stage Bottle Strap Kits

• Larger diameter black handle is easier to carry.
• A 3-bar slide allows for length adjustment.

Includes:

• 2 ea. 4” jumbo stainless steel bolt snaps
• 1” wide, adjustable length, nylon webbing handle (2200 lbs. tensile strength)
• 11” piece of black tubing to create a comfortable carry handle
• Rugged, elastic EPDM hose retainer with easy grip tab
• Marine grade stainless steel cylinder clamp
• Nylon tube webbing to cover cylinder clamp
• 2” piece of black PVC tubing to cover the cylinder band adjustment screw

SS440 - 4.4” diameter cylinders (aluminum 19)
SS525 - 5.125 to 6.0” diameter cylinders (aluminum 40)
SS725 - 6.5” to 8.0” diameter cylinders (aluminum 80)

• (2) 4" Jumbo stainless steel bolt snaps
• (1) 1" Wide nylon webbing handle 2200 lbs. tensile strength
• (1) 11" piece of clear plastic tubing to create a comfortable carry handle
• (1) Marine grade stainless steel cylinder clamp
• (1) Nylon tube webbing to cover cylinder clamp
• (1) Rugged 2" wide elastic EPDM hose retainer with easy grip tab
• (1) 2" piece of black PVC tubing to cover the cylinder band adjustment

PVC track is 20" long and made of sturdy PVC plastic so it will not rust. One track holds all Roll Control accessories, including standard or adjustable brackets, tanks holders, wine and beverage holders, rod holders, cleats and more. Or, put two tracks end-to-end and slide in more! Comes with snap-in end caps to finish track and serve as positive stop. It’s the perfect addition to your boat’s interior. “H” alignment connector for combining tracks also included. Hardware not included.

Stage Bottle Bands are made of EPDM rubber with a high resistance to Ultraviolet and Ozone.Tight stretch with heavy wall to keep hoses from slipping.
40 & 80 Cu Ft Stage Bottle Bands Stage Bottle Bands are made of EPDM rubber with a high resistance to Ultraviolet and Ozone.Tight stretch with heavy wall to keep hoses from slipping.

Oxycheq Composite Cam Buckle & Strap

A single Composite Cam Buckle with Strap. Friction pad on strap to hold tanks and keep them from slipping.

Note: Single strap only. Some BCDs require a single tank band, and some require 2 tank bands / cylinder straps.

The Composite Cam Buckle & Straps can be used for numerous configurations. One of the primary uses is utilizing the straps for a single tank wing/harness system. Using the composite buckles vs. the stainless steel helps prevent scratching of your scuba tank.

Sold individually. Comes with 1 strap.

Pony Bottle Bag

• Connects to primary diving cylinder
• Utilizes BC tank straps
• Bottom strap adds stability to bag
• Self-draining mesh bottom
• Dual Velcro straps keep the pony bottle secure
• Designed to fit both Catalina and Luxfer cylinders

Ideal for use with dry suit inflation system or secondary / backup scuba air.

Deluxe Spin-On Yoke - 316 SS

This adapter allows you to use your DIN style 1st stage regulator on a yoke style tank valve. Simply spin the adapter onto your 1st stage and your ready to attach it to the scuba tank. The stainless steel model tends to hold up better than brass in salt water and heavy use.

Standard Spin-On DIN to Yoke Adapter

This adapter allows you to use your DIN style 1st stage regulator on a yoke style tank valve. Simply spin the adapter onto your 1st stage and your ready to attach it to the scuba tank.

Pony Bottle Holder Kit

The Pony Bottle Kit is used by recreational divers, public safety divers, and technical divers. It can be used for an air or argon dry suit inflation system. It can be used for back up / secondary air system. It can be used for a canister light system, or whatever else you may want to try.