AGA FFM CONVERSION KIT, POS TO NON POS

Convert your Interspiro AGA Full Face Mask from Positive Pressure to Non-Positive Pressure. A common mis-conception is that Public Safety Divers want to go with the positive pressure FFM. They do this to keep contaminated water out of the mask and off the diver's face, but in reality the positive pressure FFM just complicates things by spraying water in the divers face when the mask is being put on or taken off (on the surface). If the positive pressure AGA is inverted it will let water in. In reality all FFMs have positive pressure, however the Pos Press AGA (originally designed for firemen) has a greater positive pressure than other full face masks or the AGA non-positive pressure version.

* Conversions should be done by Authorized AGA Service Technicians only.

Interspiro AGA Nose Push Pad 3- Slot (Pre-cut)

• Original Pressure Equalizing Pad (Old Style) for the Inter)spiro AGA Full Face Mask.
• Easy replacement part for worn out or lost push pads.
• 3 - Slot
• Made in the EU.

Interspiro Divator MKII "AGA" Accessory Rail with Universal Slide

Interspiro Divator MKII "AGA" Accessory Rail Universal System. (Includes Rail with Universal Slide).

The accessory rail system easily attaches to the Interspiro Divator MKII "AGA" full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask.

The accessory rail system easily attaches to the Interspiro Divator MKII "AGA" full-face mask and makes it possible to mount various devices to the sides of the mask. Dive lights, video lights, video cameras, sonar, manifold blocks, and welding visors are just a few examples of the equipment that works well with the rail system. Devices are attached to the removable slide and then slide on to the rail. The slide is released from the rail by pressing the release button. The rail stays mounted to the mask, while the devices are attached to slides. The camera, lights and other devices are then changed by simply sliding them on or off the rail. This quick disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. One rail may be used or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valve.

Spectrum Full Face Mask - Ocean Technology Systems

With the Spectrum Full Face Mask, Ocean Technology Systems created the best Full Face Mask on the market that allows divers to user their own regulators and eliminating the heavy cost associated with standard FFMs, without sacrificing luxury.

The Spectrum Full Face Mask provides a simple method to adapt your own regulator to the mask by eliminating the bite down mouthpiece and tying your own reg in with the rest of the FFM. This allows for some of the best features of our other Full Face Masks : no jaw fatigue, no dry mouth, double seal for a better fit, five point head harness and clear communications.
EASY TO USE - FUN - AFFORDABLE!

• Fits most 2nd stage regulators
• Allows for underwater communications
• Eliminates jaw fatigue and dry mouth
• Compatible with many accessories
• Coated / or clear tempered safety glass visor
• Hypoallergenic silicon skirt
• Wide field of vision
• Keeps face dry and warm
• Comfortable double seal
• Easy to clear
• From Authorized Dealer U.S. Water Rescue
• Instruction Manual and Tool included (CAUTION: Instruction manual does not take the place of proper training)
• Regulator NOT included

SPECIFICATIONS

• OTS Spectrum Full-Face Mask is tested to a maximum diving depth of 50m according to EN 250:2014**
• OTS Spectrum Full-Face Mask is designed for water temperatures below 10°C and is suitable for cold-water diving applications. Ultimately, cold water performance is dictated by 2nd stage regulator being used.
• OTS Spectrum Full-Face Mask is tested for diving applications with breathing air according to EN12021.
• OTS Spectrum Full-Face Mask has been tested according to the European standard EN 250:2014**

Eyewear Kit for OTS Guardian FFM

Eyewear Kit. Add your prescription lenses to wire frames in your OTS Guardian FFM. With the Guardian Full-Face Mask Eyewear Insert, enjoy a clear view underwater with securely mounted, custom engineered and field-tested prescription ready eye gear.

OTS Guardian Full Face Mask w/ ABV

• Removable 2nd stage for easy cleaning and storage(cannot be used w/o mask)
• Made of a one-piece, pliable silicone skirt combined with injection-molded,high-impact,glass-filled nylon frame and regulator housing
• Double face seal and slightly smaller/low volume oral nasal cavity to fit most faces
• Customizable nose block for equalization
• Air flow is directed up the visor face to eliminate fogging and through one-way valves in the oral nasal pocket to reduce CO2 retention
• Second stage comes off the right shoulder and uses a standard LP hose
• Communications port for easy installation of a Buddy Phone or ear/microphone assembly to connect to OTS’ Diver Communications Unit such as the Aquacom® SSB-2010 OTS
• Ambient Breathing Valve® (ABV®) allows the diver to breathe ambient air at surface, thus conserving scuba air
• Includes Mask Bag and 32” LP hose 

The ABV-1 Ambient Breathing Valve (910271-000) allows the user to breath ambient air on the surface. This helps conserve air while you wait for your dive buddy or while on the surface.

The valve is easy to use, simply turn the valve counterclockwise one turn. Outside air will pass through the one way valve. It clears the lens then enters the (2) one way valves into the oral nasal cavity. You exhale through the 2nd stage regulator. When ready to dive, close the valve and you are on the way.

• The ABV *-1 Ambient Breathing Valve allows the user to breathe ambient air at the surface, conserving your tank air. It is simple to use and its low profile keeps it out of the way.
• To use the device, while on the surface simply rotate the valve counterclockwise. The one way valve will open and allow air into the FFM
• The one way valve located on the inside of the FFM ensures that your exhaled air does not go back out the valve. Your exhaled air is sent out through the second stage regulator ensuring you do not get a Co2 "building" in the FFM.(build-up)
• The valve also is forced closed when diving. The over pressure in the FFM assures that. If you forget to close the valve before diving, the valve disc will help keep water out.
• When the valve is closed, it has a low profile.
• When the valve is closed, it has a low profile.
• The ABV*-1 is a must for all Search & Rescue Teams, Military Divers and Divers who spend a lot of the time in the water!
• Order one today - with FFM purchase: ABV*-1 (910271-001) or separately with the visor ABV-2 (910271-002) or send us your visor and we can install one (installation fee $25.00 + ABV*-1 valve)(Note: It is recommended that a Certified Interspiro Service Technician install the visor).

AGA Full Face Mask Frame (Item #13 only)

• Replacement frame for Interspiro AGA Full Face Mask.
• Color: Black
• Number: 13
• AGA Full Face Mask service should be completed only by a Certified AGA Mask Technician.

Interspiro Weight Kit

For filming they are great! They not only balance the full face mask but help keep out unwanted light from the sides. This is typically a problem when looking into a video camcorders view finder.

Does the ffm need to be balanced. This depends on the user. Most users are not in the water long enough to notice a difference. However, professional divers who spend hours underwater will notice a slight rise in the ffm. This after hours becomes uncomfortable. The weights solve the problem.

90 Degree Elbow for FFM

90 Degree Elbow. Allows diver to re-route Low Pressure regulator hose for better trim & comfort. Fits Guardian Full Face Mask (FFM) & all standard 2nd stage regulators.

• Male: 9/16 - 18 UNF - 2B Regulator or Other Adapter
• Female: 9/16 - 18 UNF -2A LP Hose or Other Adapter
• No International Orders