Aqua Lung / SeaQuest Style QD Adapter

• Convert any standard SCUBA LP regulator hose to an “Aqualung / SeaQuest Style” Quick Disconnect hose
• Installs to the second stage end of a regulator hose 
• Chromed brass construction with Viton o-rings
• Low pressure use only - below 200 psi 
• Compatible with: Aqualung / SeaQuest Air Source, Oceanic Air XS 2, US Divers Air Mic, Mares Air Control

AMP-4M Connector, 4 Pin, Male

Connector, 4 pin male con. W/gripper ring (J001)(incl: hood J002 & sockets J042)

Model#: 900030-000
The AMP-4M (p/n 900030-000) has 4 sockets and uses a gripper ring to secure it. It is considered a Male connector. The connector is not designed to be connected or disconnected underwater. This connector is pictured with the small cover. The rollover image shows a pair connected. Note: This connector has sockets but is considered a MALE connector.

Right Angle Adapter for second Stage Regulator 

Swivel LP Two Port Adapter for 1st Stage Regulator - XS SCUBA

• Reroute, or increase, the number of low pressure hoses coming off your first stage
• Chromed brass construction with Viton O-rings
• Low pressure only – below 200 psi
• (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
• p/n: AC902

OmniSwivel - Poseidon Extreme Elbow, 98deg

• 9/16"-18 Male Inlet
• Poseidon Extreme Female Insert Outlet
• Dimensions:
• Length: 1-1/2" x Width: 3/4" x Height: 1"
• Pressure Relief Build In
• Solid Brass Construction
• Made with 02 compatible materials
• PN: EL-PE

OmniSwivel Low Pressure Pivot Swivel, 1st Stage PS-LP-2

• 3/8"-24 Male Inlet
• 2 ports 3/8"-24 Female Outlet
• L Shaped
• 90 degree offset 
• Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-2

Low Pressure Pivot Swivel, 1st Stage PS-LP-4

• 3/8"-24 Male Inlet
• 2 ports 3/8"-24 Female Outlet
• T-Shaped
• 90 degree offset
• Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-4

OmniSwivel 90 degree Swivel w/ 1/4" Extension, PS-LP-3

• OmniSwivel
• 3/8"-24 Male Inlet
• 3/8"-24 Female Outlet
• Built in 1/4" Extension
• 90 degree offset Solid Brass Construction
• Made with 02 compatible materials
• PN: PS-LP-3 

The BNP-1 (black) double banana plugs are most commonly used on umbilicals for either 2- or 4-wire hard wire communications. However, we have used them on some headsets with boom or hand microphones. The picture to the left shows how you can stack them. The rollover picture shows them connected to an MK2-DCI Intercom.

The BNP-2 (red) double banana plugs are most commonly used on umbilicals for either 2- or 4-wire hard wire communications. However, we have used them on some headsets with boom or hand microphones. The picture to the left shows how you can stack them. The rollover picture shows them connected to an MK2-DCI Intercom.

AD-HMF (Hi-use to Female Marsh Marine 4pin)

• AD-HMF (Hi-use to Female Marsh Marine 4pin)
• Model#: 910113-008
• Adaptor, Hi-USE® to female marsh marine 4 pin connector. (Hi-USE® Connector is hooked up for Diver - example. Convert's Marsh Marine Ear/Mic Assembly to Hi-USE)
• Item# 910113-008

AD-HM (Hi-use to Male Marsh Marine 4pin)

• AD-HM (Hi-use to Male Marsh Marine 4pin)
• Model#: 910113-007
• Adaptor, Hi-USE® to male marsh marine 4 pin connector. (Hi-USE® Connector is hooked up for Umbilical - example. Convert's Marsh Marine ComRope to Hi-USE @ Diver End.)

Adaptor, Hi-USE® to bare wires. (Hi-USE® Connector is wired for Umbilical.)

AD-F4 Adaptor (Female AMP to Bare Wires)

Model#: 910113-000
Adaptor, female AMP-4F connector to bare wires.

BL-24 Adaptor (Converts MK2-DCI Ropes to MK-7 Ropes)

Adaptor, Male AMP-4M to Banana Plugs (Converts MK2-DCI ropes to MK-7)

OTS-910096-000

BL-28 Adaptor (Converts MK-7 Ropes to MK2-DCI Ropes)

Adaptor, Female AMP-4F to Banana Plugs (Converts MK-7 ropes to MK2-DCI)

OTS - 910093-000

BP-A4 Adaptor (Male AMP to Bare Wires)

Model#: 910069-000
Adaptor, male AMP-4M connector to bare wires.

VSB-2 Audio/Video Splitter Cable (for SSB units)

AMP-4FL Connector

Model#: 900073-000
The AMP-4FL (p/n 900073-000) is a 4-pin female connector. It has an o-ring that makes it waterproof. The connector is not designed to be connected or disconnected underwater. This connector is pictured with the large cover. The rollover image shows a pair connected. Note: This connector has pins but is considered a FEMALE connector.

AMP-4ML Connector

Model#: 900072-000
The AMP-4ML (p/n 900072-000) has 4 sockets and uses a gripper ring to secure it. The connector is not designed to be connected or disconnected underwater. This connector is pictured with the large cover. The rollover picture shows a pair connected. Note: This connector has sockets but is considered a MALE connector.

AMP-4F Connector

Model#: 900029-000
The AMP-4F (p/n 900029-000) is a 4-pin female connector. It has an o-ring that makes it waterproof. The connector is not designed to be connected or disconnected underwater. This connector is pictured with the small cover. Rollover the alternate views to see a pair connected. Note: This connector has pins but is considered a FEMALE connector.