You are here: Home > Everything SCUBA > Harness

-EDH1-
Public Safety Dive Harness
Made in the USA!
5 Year Warranty


The EDH1 (Extreme Dive Harness) is a Heavy Duty Diving Harness designed specifically for the rigors of Public Safety Diving.  Public Safety Divers will appreciate the simplicity and ease of use combine with extreme durability of all components.  It can be donned, adjusted, and buckled, without the assistance of another person; even with cold hands and thick gloves.

 The EDH1 dive harness is made in the U.S. with only the best materials: high strength webbing with bright colors for visibility, stainless steel powder-coated hardware for strength and durability, a heavy duty front D-ring for tethered attachment, a medium duty shoulder D-ring for attachment of accessories (can be ordered without), and an aluminum alloy quick release safety buckle that cannot be released under tension. The EDH1 can be adjusted to fit multiple users (one size fits most).

Another amazing benefit of the EDH1 Extreme Dive Harness is the ability for the user to not only adjust fit, but adjust “where” the harness fits on their body and “where” the pull points will be felt on the body. We give a recommendation of where it works best for us, but we understand everyone’s body is different, and there are different gear configurations out there. The perfect place for us, may not work for you due to the location of your drysuit inflator, BCD, etc.

The front of the Extreme Dive Harness has two adjustable slider plates, which allows the user to adjust the placement of the shoulder straps on the chest strap. For example: on a small person the two shoulder straps could be set to be 3.75 inches apart (where connected to the chest strap). On a larger person they can go as far apart as the user wants.

The rear cross-plate (where the webbing crosses) should be in a comfortable position a couple inches below the base of the neck. If only the front shoulder straps were adjustable, it would change the placement of the cross-plate. Therefore, the cross-plate on our dive harness is also adjustable. When the cross-plate is adjusted up or down; the distance between the shoulder straps (where they connect to the chest strap on the back) and the angle would also have to change for a perfect fit. This is easily done with 2 rear slider plates. As in the front, the rear sliders allow you to adjust the space between the shoulder straps (where they connect to the back of the chest strap). On a very small person, they can be set ½ inch apart, or as wide as you want to go.

Webbing:
Our polyester webbing combines many of the benefits of both polypro and nylon without some of the negatives. It has a 6,000 lb breaking strength, low water absorption, rot and mildew resistance, and has 5 times the abrasion resistance of polypro with a softer feel. Custom colors available.

Buckle:
Patented AustriAlpin COBRA™ quick releases are, without equal, the safest, most finely crafted, and strongest load bearing buckles available anywhere.   They are also the only stab-lock style fastener in the safety products market that will not open while under load.   That makes them the best choice (we believe, the only choice) for ensuring the highest degree of safety for yourself or your customer.    COBRAs are CNC machined, assembled, inspected, and packed (re: from alpha to omega) in our ISO quality assurance accredited facility.    All COBRA products are tested and certified by highly respected independent /3rd party test houses and exceed Mil Spec guidelines for dust / sand / salt water as well as all applicable CE, EN, CSA, ANSI, and NFPA standards for fall-protection and personal safety.  Our superior designs and commitment to quality guarantees the highest degree of reliability and assurances for safety and strength.  Not to mention, they look awesome too! All COBRAs are machined from the highest grade 7075 aluminum alloy and feature solid brass and stainless steel components.  

Plates:
All plates are stainless steel, hand finished, and powder-coated. Plates can be ordered with plain satin finish (chrome look) instead of powder-coating.

D-Rings:
Heavy duty all Stainless Steel D-rings made in the USA. D-rings come standard powder-coated black, but can be ordered with standard finish (chrome look).

 

The EDH1 (Extreme Dive Harness) is totally customizable:

Standard EDHI

  •  Red Harness
  • Adjustable Cross Plate
  • Adjustable Back Plates
  • Adjustable Front Plates
  • Quick Release Buckle
  • Front HD D-Ring (attachment point)
  • Rear D-Ring (center)
  • Front Accessory D-Ring (right shoulder)

Add Cutting Tools

  • Stainless Steel Shears with custom hard case $30
  • Spyderco Yellow Saver Salt serrated knife w/ bolt snap tether $109


Semi Custom EDH1 Options (Additional $5)

  •  Remove Front Accessory D-Ring
  • Remove Rear Accessory D-ring
  • Standard finish on stainless steel plates (titanium look)
  • No finish on D-Rings (chrome look)

Custom EDH1 Options (Additional $10)

  • Custom color (black, burgundy, grey, lime, orange, green, blue, yellow, tan)
  • Move Front Accessory D-Ring to left shoulder

Custom Sizes

  • XS-L ($15)
  • XL and above ($25)

Sort By:
Page of 1
Drop Dee for Shoulder Straps Fixed Waist Staging Ring BCD Harness Utility Keeper EDH1 Extreme Dive Harness
Fixed Waist Staging Ring
Our Price: $24.95
EDH1 Extreme Dive Harness
Our Price: $195.00
   
 
Top Categories
SCUBA
Swiftwater Rescue
OTS
Tactical
Swimming
Misc.